Part # CP19438-ERP is the seat gasket that is used with TeeJet nozzle bodies, tips and caps. The CP19438-ERP is a EPDM material, Viton is available...View full details
- Boom Valves
- Boomless Nozzles
- Caps & Gaskets
- Control Valves
- Flow Indicators
- Foam Markers
- Nozzle Bodies
- Spray Tips
- Tip Screens & Check Valves
Spray Tips/Boom Components
Due to the number of parts available from each manufacturer, our entire selection is not all online. To order parts not found online please call 1-800-706-9530.
The 1/4" ball nozzle holder is used in a variety of spraying applications. Gregson Clark roadside sprayers commonly use this nozzle holder. The bal...View full details
The 3/8" ball nozzle holder is used in a variety of spraying applications. Gregson Clark roadside sprayers commonly use this nozzle holder. The bal...View full details
The 11750 check valve is used for larger capacity TeeJet nozzles where strainers are not required. The 11750-5 is a brass check valve. Ball check ...View full details
Part # 20511-00 is the 3/8" hose barb 90 degree x ORS. This does come with the required O-ring. This fitting is used on the low flow indicator and ...View full details
Bypasses excess liquid. Adjustable to maintain control of line pressure at any pressure within the valve's operating range. Selected pressure setti...View full details
The AIC spray tips from TeeJet are a complete assembly which includes the nozzle, cap, and gasket. All AIC spray tips listed are the VK models whic...View full details
Part # CP8027-NYB is the threaded cap that is used with TeeJet threaded nozzle bodies and adapters. The CP8027-NYB is made from nylon.
The CP114440 caps are used with a variety of TeeJet tips and nozzle bodies. The Quick TeeJet caps are made from nylon and feature a quarter turn lo...View full details
The AIXR TeeJet Flat Spray Tip offers the benefits of obtaining excellent drift resistance without compromising spray coverage. Tips producing very...View full details
The TeeJet TeeValve is used for selective control of three section boom sprayers at pressures up to 300 psi (20 bar). The AA17L features: Use to ...View full details
The AA144P-1 two-way solenoid-operated DirectoValve® control valve is used on many spraying operations. The AA144P-1 offers a 3/4" inlet, 1/2" outl...View full details
The TJ Golf foam marker is built for small and medium size turf sprayers. Small foam balls are generated at the end of the boom to use as left/rig...View full details
Part # 20521-00 is the ORS cap to the Wilger Flow Indicators. This is to be used with both the low flow indicators and the standard indicators.
Part# 20460-15 is the replacement Viton O-ring for Wilger flow indicators. EPDM O-rings are also available.
Part # 22251-311-500-NYB is a single barbed nozzle body equipped with built in diaphragm check valve. This is part of the TeeJet QJ300 series. This...View full details
The Turbo TeeJet spray tips are a wide angle, flat spray tip. Typical applications are pre-emerge surface applied herbicides with minimum spray pre...View full details
The QJ111SQ-1-1/4 clamp is used to hold TeeJet quick series nozzle bodies to dry booms. The QJ111SQ-1-1/4 is used on 1 -/4" square tubing.
The QJ111SQ-1-1/2 clamp is used to hold TeeJet quick series nozzle bodies to dry booms. The QJ111SQ-1-1/2 is used on 1-1/2" square tubing.
Part # CP1325 is the threaded brass cap that is used with TeeJet threaded nozzle bodies and adapters.
Boominator® boomless spray nozzles are made in the U.SA. and carry a 3-year warranty against defects in materials and workmanship. All nozzles feat...View full details