Hypro 1 1/2" Strainer
Hypro strainer # 3350-0112P is a 1 1/2" "T" line strainer with 1 1/2" female threads on both ends and comes with a 20 mesh screen.
Hypro strainer # 3350-0112P is a 1 1/2" "T" line strainer with 1 1/2" female threads on both ends and comes with a 20 mesh screen.
These replacement strainer screens are for the Hypro 1" in-line strainer. Part# 3800-0040 is the 20 mesh, while the 3800-0041 is the 50 mesh. The s...
View full detailsHypro strainer # 3350-0057P is a 1" "T" line strainer with 1" female threads on both ends and comes with a 20 mesh screen.
Part # 3430-0383 is the rebuild kit for Hypro 1502 series roller pumps. You will need to rebuild roller pumps when they start to loose performance....
View full detailsA centrifugal pump that is leaking could mean it is time for a new pump seal. The Hypro 1550 and 1551 centrifugal pumps use seal kit # 3430-0464 fo...
View full details3800-0065 is the stainless steel replacement 20-mesh screen for Hypro 1-1/2" nylon line strainers.
3800-0043 is the stainless steel replacement 20-mesh screen for Hypro 1-1/4" nylon line strainers.
3800-0029 is the stainless steel replacement 50-mesh screen for Hypro 1/2" and 3/4" nylon line strainers.
Hypro strainer # 3350-0040P is a 3/4" "T" line strainer with 3/4" female threads on both ends and comes with a 20 mesh screen.
If your Hypro centrifugal pump is leaking chances are you need a new seal kit. Part # 3430-0334 seal kit fits the 9000c pump. To ensure this kit fi...
View full detailsOver time roller pumps will begin to wear and not perform as they once did. Hypro part # 3430-0381 is the rebuild kit for Hypro 7560 roller pumps. ...
View full detailsThe 4000 series roller pumps from Hypro provide up to 10.4 GPM. The pump material will determine how long a pump will run before failure. The cast ...
View full detailsHypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicide...
View full details3800-0066 is the stainless steel replacement 50-mesh screen for Hypro 1-1/2" nylon line strainers.
3800-0025 is the stainless steel replacement 50-mesh screen for Hypro 1/2" and 3/4" nylon line strainers.
When a roller pump begins to loose performance and will not build pressure, a rebuild kit may be needed. For the Hypro 6500 series pumps part # 343...
View full detailsHypro roller pumps will need to be rebuilt when they start t loose performance. Part # 3430-0380 is the rebuild kit for Hypro 6500 series roller pu...
View full detailsIf your Hypro centrifugal pump is leaking chances are you need a new seal. Part # 3430-0333 is seal kit fits a variety of Hypro pumps including the...
View full detailsA centrifugal pump that is leaking could mean it is time for a new pump seal. The Hypro 9305 centrifugal pump use seal kit # 3430-0500 for rebuildi...
View full detailsThe Hypro Aqua-Tiger is a 12V centrifugal pump that is rated up to 19 GPM, with a max PSI of 7. Both the inlet and outlet ports are 3/4" female pip...
View full detailsThe Hypro Aqua-Tiger is a 12V centrifugal pump that is rated up to 19 GPM, with a max PSI of 7. Both the inlet and outlet ports are 3/4" female pip...
View full details1700-0057 is the replacement Buna-N gasket for Hypro 1", 1-1/4", and 1-1/2" nylon line strainers.
1700-0044 is the replacement Buna-N gasket for Hypro 1/2" and 3/4" nylon line strainers.
If you need to rebuild your Hypro centrifugal pump part # 3430-0332 may fit your pump. This seal kit fits a variety of Hypro pumps including the 92...
View full detailsDiaphragm kit 9910-Kit2480 includes all parts needed to replace diaphragms on the Hypro D1064 pump. Hypro recommends changing diaphragms every 500 ...
View full detailsHypro rebuild kit 9910-Kit1721 is the replacement diaphragm kit for the D115 and D135 diaphragm pumps. Hypro recommends changing the diaphragms eve...
View full detailsHypro part # 9910-Kit1734 is the replacement diaphragm kit for the Hypro D1504 and D1304 diaphragm pumps. Kit1734 has been superseded by AR1734. A...
View full detailsHypro rebuild kit 9910-Kit1730 is the replacement diaphragm kit for the D160 diaphragm pump. Hypro recommends changing the diaphragms every 500 hou...
View full detailsHypro rebuild kit 9910-Kit1722 is the replacement diaphragm kit for the Hypro D250 diaphragm pump. Hypro recommends changing the diaphragms every 5...
View full detailsHypro rebuild kit 9910-Kit1723 is the replacement diaphragm kit for the D252 diaphragm pump. Hypro recommends changing the diaphragms every 500 hou...
View full detailsThe Hypro D252 is a medium pressure, two diaphragm pump commonly used for lawn care, pest control and turf spraying applications. This pump assembl...
View full detailsThe Hypro D252GRGI is a medium pressure, two diaphragm pump commonly used for lawn care and turf spraying applications. This pump assembly comes co...
View full detailsThe 9910-Kit2409 is the replacement O-ring kit for the Hypro D252 diaphragm pumps. This kit is typically used when rebuilding the pump at the end o...
View full detailsReplacing pump valves are a maintenance task that should be tackled every couple of years. To replace the Hypro D252 pump valves you will need Hypr...
View full detailsHypro rebuild kit 9910-Kit1724 is the replacement diaphragm kit for the D30 diaphragm pump. Hypro recommends changing the diaphragms every 500 hour...
View full detailsHypro part # 9910-Kit1916 is the replacement O-ring kit for the Hypro D30 diaphragm pump. This kit is typically used when rebuilding the pump at th...
View full detailsHypro part # 9910-Kit1917 is the replacement valve kit for the Hypro D30 diaphragm pump. Valves become worn over time which can affect the overall ...
View full details9910-Kit2389 is the replacement o-ring kit for the Hypro D303 and D403 diaphragm pumps. This kit is typically used when rebuilding the pump at the ...
View full detailsDiaphragm kit 9910-Kit2423 comes with all the parts needed to rebuild the Hypro D303 and D403 pumps. Hypro recommends changing the diaphragms every...
View full detailsHypro 9910-Kit2388 is the valve replacement kit for the Hypro D303 and D403 diaphragm pumps. Pump valves may become worn over time which will affec...
View full detailsHypro rebuild kit 9910-Kit1725 is the replacement diaphragm kit for the D50 diaphragm pump. Hypro recommends changing the diaphragms every 500 hour...
View full details9910-Kit1919 is the replacement O-ring kit for the Hypro D50 diaphragm pump. This kit is typically used when rebuilding the pump at the end of the ...
View full detailsHypro 9910-Kit1920 is the replacement valve kit for the D50 diaphragm pump. Valves may become worn over time which will affect the pump performance...
View full detailsDiaphragm Kit 9910-Kit1881 is used to rebuild to Hypro D503. Hypro recommends changing the diaphragms every 500 hours or three months. whichever co...
View full detailsHypro 9910-Kit1987 is the replacement valve kit for the Hypro D503 diaphragm pump. Pump valves may become worn over time which will affect the pump...
View full detailsRebuild kit 9910-Kit1720 is the replacement diaphragm kit for the Hypro D70 diaphragm pump. Hypro reccomends changing the diaphragsm every 500 hour...
View full detailsIf your pump is not building pressure as it once was you may need to rebuild the regulator. The Hypro GR40 regulator uses part# 9910-Kit2488 as the...
View full detailsHypro part # 9910-Kit1757 is the repair kit for the Hypro GS40GI control unit. The GS40GI control unit is typically found on the D30 and D50 diaphr...
View full detailsSign-up for Gregson-Clark email updates.
Gregson-Clark Spraying Equipment
3213 Lehigh Street
Caledonia, NY 14423
Monday – Friday, 8 AM – 5 PM EST
Toll-Free: 1-800-706-9530
Local: (585) 538-9570
Fax: (585) 538-9577
Parts/Accessories
Andy@gregsonclark.com
Sales
Zack@gregsonclark.com
Copyright © 2024 Gregson-Clark Spraying Equipment.
Rhett M Clark Inc. All Rights Reserved. Powered by Shopify