Kappa 33/43/53 Diaphragm Kit - 8700.45
Part # 8700.45 is the replacement diaphragm kit for the Udor Kappa-33/43/53 diaphragm pumps. Udor recommends replacing the pump diaphragms after 50...
View full detailsWith so many different pumps available, the options can be confusing. Our goal is not just to sell you a pump, we want to help you choose the right pump for your application. We welcome your phone call to discuss your application needs. Listed below are several pump brands we stock. For a full selection from each manufacture please use the filters to the left.
If you're not sure which brand would best suit your needs, a quick overview of each brand is below.
Each brand offers an extensive selection that is readily available. Due to the vast selection of pumps and replacement parts, our entire selection is yet to be all online. If there is a specific pump or part you are looking that is not listed online please call us, we'd be more than happy to help.
Part # 8700.45 is the replacement diaphragm kit for the Udor Kappa-33/43/53 diaphragm pumps. Udor recommends replacing the pump diaphragms after 50...
View full detailsSAE 40W hydraulic lubricant specially formulated for use in diaphragm & plunger pumps. Non-detergent Non-foaming Resists Breakdown Due to Oxid...
View full detailsPart# 1603.69 is the oil sight gauge plug on the gear reduction unit. This plug is found on many of the Kappa and Zeta series diaphragm pumps. The ...
View full detailsThe Udor GG350BM is a direct replacement for the low pressure gauges on Udor control units. This gauge features a 1/4" MNPT connection located on t...
View full detailsPart# 6033.01 has been replaced with part # 6033.13. Part# 6033.13 is the replacement oil bowl for most Udor diaphragm pumps. The oil bowl kit com...
View full detailsPart # 1101.12 is the o-ring for the suction barb on most Udor Kappa pumps.
The 6062.A9 rebuild kit replaces the main internals on the Udor 6010.93 and 6010.95 regulators. These regulators are are typically found on the Kap...
View full detailsPart # 8700.26 is the replacement diaphragm kit for the Udor Kappa-55 diaphragm pump. Udor recommends replacing the pump diaphragms after 500 hours...
View full detailsPart # 0254.04 is the 3/4" bypass barb off the control unit. This barb is used to run jet agitation on Gregson-Clark Sprayers.
Part # 0604.18 is the replacement suction barb nut for Udor pumps. You will also need part # 1101.41 which is the o-ring, and part # 0202.52, the b...
View full detailsThe 8701.10 has been superseded by 6062.55, this rebuild kit replaces the main internals on the Udor 6010.24 and 6010.24/LP control units. These co...
View full detailsPart # is 6006.01 has been superseded by 6063.04, it is the valve assembly for most Udor Kappa series pumps. As these are sold individually, please...
View full detailsPart # 1101.41 is the o-ring for the suction barb on most Udor Kappa pumps.
Part # 0202.52 is the replacement 1-1/4" suction barb for Udor pumps. You will also need part # 1101.41 which is the o-ring, and part # 0604.18, th...
View full detailsPart # GG-350 is the replacement 350 PSI pressure gauge off Udor pressure regulators.
The 6010.93 control unit features right angle entry from the main body for smoother operation and longer life. The regulator includes a manual dump...
View full detailsPart # 1204.24 is the replacement urethane poppet used in several Udor pressure regulators.
Hypro rebuild kit 9910-Kit1724 is the replacement diaphragm kit for the D30 diaphragm pump. Hypro recommends changing the diaphragms every 500 hour...
View full detailsThe 6010.24 regulator can be pump or remote mounted on numerous sprayers. This control unit features two 1/2" ball valve discharge ports and pressu...
View full detailsHypro rebuild kit 9910-Kit1723 is the replacement diaphragm kit for the D252 diaphragm pump. Hypro recommends changing the diaphragms every 500 hou...
View full detailsPart # 8700.02 is the replacement diaphragm kit for the Udor Kappa-30/40/50 diaphragm pumps. Udor recommends replacing the pump diaphragms after 50...
View full detailsPart# RK-GE-860/1660 is the rebuild kit for the Ace GE-860 and Ace GE-1660 Centrifugal Pumps.
Part # 8700.10 is the replacement diaphragm kit for the Udor Kappa-75 diaphragm pump. Udor recommends replacing the pump diaphragms after 500 hours...
View full detailsSign-up for Gregson-Clark email updates.
Gregson-Clark Spraying Equipment
3213 Lehigh Street
Caledonia, NY 14423
Monday – Friday, 8 AM – 5 PM EST
Toll-Free: 1-800-706-9530
Local: (585) 538-9570
Fax: (585) 538-9577
Parts/Accessories
Matt@gregsonclark.com
Sales
Zack@gregsonclark.com
Copyright © 2024 Gregson-Clark Spraying Equipment.
Rhett M Clark Inc. All Rights Reserved. Powered by Shopify