Part # 8700.45 is the replacement diaphragm kit for the Udor Kappa-33/43/53 diaphragm pumps. Udor recommends replacing the pump diaphragms after 50...View full details
- Control Unit Rebuild
- Control Units
- Gear Reduction
- Pressure Gauges
- Pump Oil
- Pump Rebuild Kits
- Spare Parts
Pumps & Control Units
With so many different pumps available, the options can be confusing. Our goal is not just to sell you a pump, we want to help you choose the right pump for your application. We welcome your phone call to discuss your application needs. Listed below are several pump brands we stock. For a full selection from each manufacture please use the filters to the left.
If you're not sure which brand would best suit your needs, a quick overview of each brand is below.
- Udor - Diaphragm and plunger pumps for a wide range of spraying needs.
- Hypro - Numerous pump types including roller, piston and diaphragm pumps.
- Shurflo - Electric diaphragm pumps that are available in 12v and 110v options.
- Banjo - Centrifugal pumps.
- Flojet - Electric diaphragm pumps.
- Ace - Centrifugal pumps, commonly found on agricultural equipment.
- Pacer - Poly Centrifugal pumps such as transfer pumps, used in agriculture.
Each brand offers an extensive selection that is readily available. Due to the vast selection of pumps and replacement parts, our entire selection is yet to be all online. If there is a specific pump or part you are looking that is not listed online please call us, we'd be more than happy to help.
The Udor GG350BM is a direct replacement for the low pressure gauges on Udor control units. This gauge features a 1/4" MNPT connection located on t...View full details
Hypro SAE 30-weight, non-detergent oil, 1 quart.
Part # 1101.12 is the o-ring for the suction barb on most Udor Kappa pumps.
Part # 0604.26 is the bypass barb nut on Udor control units.
Hypro part # 3430-0037 is the rebuild kit for Hypro 5200 series piston pumps. Your pump may need to be rebuilt if performance begins to decline. Th...View full details
Part# 6033.01 is the replacement oil bowl for most Udor diaphragm pumps. The oil bowl kit comes with the bowl, cap, cap o-ring, pump o-ring, and bo...View full details
Part # is 6006.01 is the valve assembly for most Udor Kappa series pumps. As these are sold individually, please see how many your pump takes to re...View full details
Part# 1603.69 is the oil sight gauge plug on the gear reduction unit. This plug is found on many of the Kappa and Zeta series diaphragm pumps. The ...View full details
Part # 8700.26 is the replacement diaphragm kit for the Udor Kappa-55 diaphragm pump. Udor recommends replacing the pump diaphragms after 500 hours...View full details
The 6062.A9 rebuild kit replaces the main internals on the Udor 6010.93 and 6010.95 regulators. These regulators are are typically found on the Kap...View full details
Part # 8700.10 is the replacement diaphragm kit for the Udor Kappa-75 diaphragm pump. Udor recommends replacing the pump diaphragms after 500 hours...View full details
Part # 3430-0007 is the rebuild kit for Hypro 5300 series piston pumps. This kit is needed when pump performance begins to decline. This kit will r...View full details
The 8701.10 rebuild kit replaces the main internals on the Udor 6010.24 and 6010.24/LP control units. These control units are found on the kappa-30...View full details
The 6010.93 control unit features right angle entry from the main body for smoother operation and longer life. The regulator includes a manual dump...View full details
Part # 1204.24 is the replacement urethane poppet used in several Udor pressure regulators.
Part # 0604.18 is the replacement suction barb nut for Udor pumps. You will also need part # 1101.41 which is the o-ring, and part # 0202.52, the b...View full details
Part # 0254.04 is the 3/4" bypass barb off the control unit. This barb is used to run jet agitation on Gregson-Clark Sprayers.
Part # 8700.02 is the replacement diaphragm kit for the Udor Kappa-30/40/50 diaphragm pumps. Udor recommends replacing the pump diaphragms after 50...View full details
Part # 1101.41 is the o-ring for the suction barb on most Udor Kappa pumps.
Part # 0202.52 is the replacement 1-1/4" suction barb for Udor pumps. You will also need part # 1101.41 which is the o-ring, and part # 0604.18, th...View full details
This control unit, for mounting on Hypro pump models 9910-D30 and 9910-D50, is capable of handling flow rates up to 21 gpm and pressures up to 580 ...View full details
The 6010.24 regulator can be pump or remote mounted on numerous sprayers. This control unit features two 1/2" ball valve discharge ports and pressu...View full details
Hypro rebuild kit 9910-Kit1724 is the replacement diaphragm kit for the D30 diaphragm pump. Hypro recommends changing the diaphragms every 500 hour...View full details