Spray Tips/Boom Components

Part # CP19438-ERP is the seat gasket that is used with TeeJet nozzle bodies, tips and caps. The CP19438-ERP is a EPDM material, Viton is available...

The 1/4" ball nozzle holder is used in a variety of spraying applications. Gregson Clark roadside sprayers commonly use this nozzle holder. The bal...

Bypasses excess liquid. Adjustable to maintain control of line pressure at any pressure within the valve's operating range. Selected pressure setti...

Part # 20511-00 is the 3/8" hose barb 90 degree x ORS. This does come with the required O-ring. This fitting is used on the low flow indicator and ...

TeeJet tip strainers are used in to protect spray tips and orifices from clogging and damage. The color of the tip screen correlates to the mesh si...

The 11750 check valve is used for larger capacity TeeJet nozzles where strainers are not required. The 11750-5 is a brass check valve. Ball check ...

The 3/8" ball nozzle holder is used in a variety of spraying applications. Gregson Clark roadside sprayers commonly use this nozzle holder. The bal...

The AIC spray tips from TeeJet are a complete assembly which includes the nozzle, cap, and gasket. All AIC spray tips listed are the VK models whic...

Part # 20521-00 is the ORS cap to the Wilger Flow Indicators. This is to be used with both the low flow indicators and the standard indicators.

Flow indicators allow sprayer operators to visually monitor the flow of the system to spray tips and orifices. The floating ball in the indicator b...

The XR flat fan spray tips from TeeJet offer uniform coverage at an affordable price. The "VS" tip features VisiFlo color coding with a stainless s...

The Boom X Tender is a boomless spray nozzle that is ideal for applications where a conventional boom cannot be used due to obstacles such as, powe...

The Boom X Tender is a boomless spray nozzle that is ideal for applications where a conventional boom cannot be used due to obstacles such as, powe...

Flow indicators allow sprayer operators to visually monitor the flow of the system to spray tips and orifices. The floating balls in the indicator ...

Part# 20460-15 is the replacement Viton O-ring for Wilger flow indicators. EPDM O-rings are also available.

The TeeJet Triggerjet Trigger Valve is ideal for backpack and other small low pressure sprayers.The body is made from polypropylene and features a ...

Part # 22251-311-500-NYB is a single barbed nozzle body equipped with built in diaphragm check valve. This is part of the TeeJet QJ300 series. This...

The Boom X Tender is a boomless spray nozzle that is ideal for applications where a conventional boom cannot be used due to obstacles such as, powe...

The Turbo TeeJet spray tips are a wide angle, flat spray tip. Typical applications are pre-emerge surface applied herbicides with minimum spray pre...

The QJ111SQ-1-1/2 clamp is used to hold TeeJet quick series nozzle bodies to dry booms. The QJ111SQ-1-1/2 is used on 1-1/2" square tubing.

The CP114442 caps are used with a variety of TeeJet tips and nozzle bodies. The Quick TeeJet caps are made from nylon and feature a quarter turn lo...

The TeeJet TeeValve is used for selective control of three section boom sprayers at pressures up to 300 psi (20 bar). The AA17L features:  Use to ...

The AA144P-1 two-way solenoid-operated DirectoValve® control valve is used on many spraying operations. The AA144P-1 offers a 3/4" inlet, 1/2" outl...

The TJ Golf  foam marker is built for small and medium size turf sprayers. Small foam balls are generated at the end of the boom to use as left/rig...