Filters
Barb Size
Category
- Boom Valves
- Boomless Nozzles
- Caps & Gaskets
- Control Unit Rebuild
- Control Units
- Control Valves
- Extensions
- Fittings
- Flow Indicators
- Foam Markers
- Gear Reduction
- Hose Reel Accessories
- Hose Reel Replacement Parts
- Hose Reels
- Manual Valves
- Nozzle Bodies
- Nozzles
- Pressure Gauges
- Pump Oil
- Pump Rebuild Kits
- Pumps
- Rebuild Kits
- Root Feeders
- Spare Parts
- Spray Guns
- Spray Hose
- Spray Tips
- Suction Hose
- Tank
- Tank Lid
- Tip Screens & Check Valves
- Trigger Valves
Drive
Hose I.D.
Inlet
Manufacturer
- Ace
- AR Pumps
- Arag
- Banjo
- Boominator
- Dura Products
- FloJet
- Gregson-Clark
- Hannay
- HD Hudson
- Hypro
- Kuriyama
- Lesco
- Micro-Trak
- Pacer
- PumpTec
- Remco
- SHURflo
- TeeJet
- Udor
- Wilger
Material
Mesh
Pump Type
Sprayer Accessory Category
Strainer/Screen Category
Tank Capacity
- 1000+ Gallons
- 101 – 200 Gallons
- 201 – 500 Gallons
- 5 – 50 Gallons
- 501 – 1000 Gallons
- 51 – 100 Gallons
Tank Type
Thread Size
Type
Products
Kappa 33/43/53 Diaphragm Kit - 8700.45
Part # 8700.45 is the replacement diaphragm kit for the Udor Kappa-33/43/53 diaphragm pumps. Udor recommends replacing the pump diaphragms after 50...
View full detailsKappa 43 Complete Pump Rebuild - 8700.45CK
This Kappa 43 Complete Pump Rebuild - 8700.45CK ensures maximum performance of your Kappa 33, 43, or 53 pump. Containing all essential components, ...
View full detailsKappa 43 Head Assembly
Udor Kappa 25/43/55 Head Assembly. Part # 6017.13 Superseded by Part # 6017.F2
Kappa 55 Complete Pump Rebuild - 8700.26CK
This Kappa 55 Complete Pump Rebuild - 8700.26CK is the perfect choice for rebuilding your Kappa 55 pump. It comes with everything you need to get t...
View full detailsKappa 55 GR-8 Diaphragm Pump
The Kappa 55 GR-8 is a three diaphragm pump complete with gear reduction and control unit. The control unit features a manual dump lever and dual b...
View full detailsKappa-120/150 Complete Repair Kit - 8700.22CK
Udor part 8700.22CK is a complete rebuild kit for the Kappa-120 and Kappa-150 diaphragm pumps. Udor recommends replacing the pump diaphragms after ...
View full detailsKappa-120/150 Diaphragm Kit - 6062.29
Udor part 6062.29 replaces 8700.22 and is the replacement diaphragm kit for the Kappa-120 and Kappa-150 diaphragm pumps. Udor recommends replacing...
View full detailsKappa-25 Diaphragm Kit - 6062.C1
Part # 6062.C1 has superseded 8700.65 for the Udor Kappa-25 diaphragm pump. Udor recommends replacing the diaphragms after 500 hours. The kit inclu...
View full detailsKappa-30/40/50 Diaphragm Kit - 8700.02
Part # 8700.02 is the replacement diaphragm kit for the Udor Kappa-30/40/50 diaphragm pumps. Udor recommends replacing the pump diaphragms after 50...
View full detailsKappa-55 Diaphragm Kit - 8700.26
Part # 8700.26 is the replacement diaphragm kit for the Udor Kappa-55 diaphragm pump. Udor recommends replacing the pump diaphragms after 500 hours...
View full detailsKappa-7/12/18 Diaphragm Kit - 8700.27
Part # 8700.27 is the replacement diaphragm kit for the Kappa-7/12/18 diaphragm pumps. Udor recommends replacing the diaphragms every 500 hours. Th...
View full detailsKappa-75 & Diaphragm Kit - 8700.10
Part # 8700.10 is the replacement diaphragm kit for the Udor Kappa-75 diaphragm pump. Udor recommends replacing the pump diaphragms after 500 hours...
View full detailsUdor 1-1/4" Inlet Barb
Part # 0202.52 is the replacement 1-1/4" suction barb for Udor pumps. You will also need part # 1101.41 which is the o-ring, and part # 0604.18, th...
View full detailsUdor 3/4" Bypass Barb
Part # 0254.04 is the 3/4" bypass barb off the control unit. This barb is used to run jet agitation on Gregson-Clark Sprayers.
Udor 350 PSI Gauge - Back Mount
The Udor GG350BM is a direct replacement for the low pressure gauges on Udor control units. This gauge features a 1/4" MNPT connection located on t...
View full detailsUdor 5027.75 Gear Reduction
The Udor 5027.75 gear reduction is used to connect Udor pumps to 4-6.5 HP engines with a 3/4" keyed shaft. 5027.75 requires 16oz of 90W gear oil. ...
View full detailsUdor 5033.A4 Gear Reduction
The Udor 5033.A4 gear reduction is used to connect specific Udor pumps to 8-13 HP engines with a 1" keyed shaft. The 5033.A4 gearbox requires 16oz ...
View full detailsUdor 5071.75 Gear Reduction
The Udor 5071.75 gear reduction is used to connect Kappa-33, Kappa-43 and Kappa-53 pumps to 4-6.5 HP engines with a 3/4" keyed shaft. ...
View full detailsUdor 6005.15 Regulator
The Udor 6005.15 high volume brass pressure regulator features a master on.off lever, 3/4" male BSP inlet port, 1/4" gauge port, and a 1" bypass po...
View full detailsUdor 6010.23 Regulator Rebuild Kit - 8701.01
Udor part # 8701.01 rebuild kit replaces the main internals on the Udor 6010.23 control units. These control units are found on the Iota-20 diaphra...
View full detailsUdor 6047.06 Regulator
The Udor 6047.06 is a pump or remote mount control unit with dual 1/2" ball valve discharge ports and pressure gauge. This regulator is rated for 5...
View full detailsUDOR Aluminum Trigger Valve
Part # 23.208.84 is the Udor nickel plated aluminum trigger valve with 1/2" female inlet & outlet ports. The stainless steel trigger provides a...
View full detailsUdor Beta 170 TS2C Diaphragm Pump
* This unit ships via tractor trailer and is unable to process shipping online. Please call to place order. The Udor Beta 170 is a 4-cylinder, hi...
View full detailsUdor Beta 200/240 Diaphragm Kit – 6062.C7
Part # 8700.55 has been superseded by 6062.C7 is the replacement diaphragm kit for the Udor Beta-200 and Beta-240 diaphragm pumps. Udor recommends ...
View full detailsUdor Beta-150 Diaphragm Kit – 8700.07
Part # 8700.07 is the replacement diaphragm kit for the Udor Beta-150 and Omega-170 diaphragm pumps. Udor recommends diaphragm replacement after 50...
View full details