Filters
Barb Size
Category
- Boom Valves
- Boomless Nozzles
- Caps & Gaskets
- Control Unit Rebuild
- Control Units
- Control Valves
- Extensions
- Fittings
- Flow Indicators
- Foam Markers
- Gear Reduction
- Hose Reel Accessories
- Hose Reel Replacement Parts
- Hose Reels
- Manual Valves
- Nozzle Bodies
- Nozzles
- Pressure Gauges
- Pump Oil
- Pump Rebuild Kits
- Pumps
- Rebuild Kits
- Root Feeders
- Spare Parts
- Spray Guns
- Spray Hose
- Spray Tips
- Suction Hose
- Tank
- Tank Lid
- Tip Screens & Check Valves
- Trigger Valves
Drive
Hose I.D.
Inlet
Manufacturer
- Ace
- AR Pumps
- Arag
- Banjo
- Boominator
- Dura Products
- FloJet
- Gregson-Clark
- Hannay
- HD Hudson
- Honda
- Hypro
- Kuriyama
- Lesco
- Micro-Trak
- Pacer
- PumpTec
- Remco
- SHURflo
- TeeJet
- Udor
- Wilger
Material
Mesh
Pump Type
Sprayer Accessory Category
Strainer/Screen Category
Tank Capacity
- 1000+ Gallons
- 101 – 200 Gallons
- 201 – 500 Gallons
- 5 – 50 Gallons
- 501 – 1000 Gallons
- 51 – 100 Gallons
Tank Type
Thread Size
Type
Products
Udor 1 1/4" Inlet Barb Assembly
The Udor 1 1/4" Inlet Barb Assembly includes all three components for the inlet side of the pump. 1 1/4" is used on most Gregson-Clark Sprayers. In...
View full details
Udor 1-1/4" Inlet Barb
Part # 0202.52 is the replacement 1-1/4" suction barb for Udor pumps. You will also need part # 1101.41 which is the o-ring, and part # 0604.18, th...
View full details
Udor 3/4" Bypass Barb
Part # 0254.04 is the 3/4" bypass barb off the control unit. This barb is used to run jet agitation on Gregson-Clark Sprayers.
Udor 3/4" Bypass Barb Assembly
The Udor 3/4" Bypass Barb Assembly includes all three components for the bypass side of the control unit that is used to run jet agitation on Gregs...
View full details
Udor 350 PSI Gauge - Back Mount
The Udor GG350BM is a direct replacement for the low pressure gauges on Udor control units. This gauge features a 1/4" MNPT connection located on t...
View full details
Udor 5027.75 Gear Reduction
The Udor 5027.75 gear reduction is used to connect Udor pumps to 4-6.5 HP engines with a 3/4" keyed shaft. 5027.75 requires 16oz of 90W gear oil. ...
View full details
Udor 5033.A4 Gear Reduction
The Udor 5033.A4 gear reduction is used to connect specific Udor pumps to 8-13 HP engines with a 1" keyed shaft. The 5033.A4 gearbox requires 16oz ...
View full details
Udor 5071.75 Gear Reduction
The Udor 5071.75 gear reduction is used to connect Kappa-33, Kappa-43 and Kappa-53 pumps to 4-6.5 HP engines with a 3/4" keyed shaft. Udor 507...
View full details
Udor 6005.15 Regulator
The Udor 6005.15 high volume brass pressure regulator features a master on.off lever, 3/4" male BSP inlet port, 1/4" gauge port, and a 1" bypass po...
View full details
Udor 6010.23 Regulator Rebuild Kit - 8701.01
Udor part # 8701.01 rebuild kit replaces the main internals on the Udor 6010.23 control units. These control units are found on the Iota-20 diaphra...
View full details
Udor 6047.06 Regulator
The Udor 6047.06 is a pump or remote mount control unit with dual 1/2" ball valve discharge ports and pressure gauge. This regulator is rated for 5...
View full details
UDOR Aluminum Trigger Valve
Part # 23.208.84 is the Udor nickel plated aluminum trigger valve with 1/2" female inlet & outlet ports. The stainless steel trigger provides a...
View full details
Udor Beta 170 TS2C Diaphragm Pump
* This unit ships via tractor trailer and is unable to process shipping online. Please call to place order. The Udor Beta 170 is a 4-cylinder, hi...
View full details
Udor Beta 200/240 Diaphragm Kit – 6062.C7
Part # 8700.55 has been superseded by 6062.C7 is the replacement diaphragm kit for the Udor Beta-200 and Beta-240 diaphragm pumps. Udor recommends ...
View full details
Udor Beta-150 Diaphragm Kit – 8700.07
Part # 8700.07 is the replacement diaphragm kit for the Udor Beta-150 and Omega-170 diaphragm pumps. Udor recommends diaphragm replacement after 50...
View full details