With so many different pumps available, the options can be confusing. Our goal is not just to sell you a pump, we want to help you choose the right pump for your application. We welcome your phone call to discuss your application needs. Listed below are several pump brands we stock. For a full selection from each manufacture please use the filters to the left.
If you're not sure which brand would best suit your needs, a quick overview of each brand is below.
Each brand offers an extensive selection that is readily available. Due to the vast selection of pumps and replacement parts, our entire selection is yet to be all online. If there is a specific pump or part you are looking that is not listed online please call us, we'd be more than happy to help.
Part # 8700.45 is the replacement diaphragm kit for the Udor Kappa-33/43/53 diaphragm pumps. Udor recommends replacing the pump diaphragms after 50...
View full details
SAE 40W hydraulic lubricant specially formulated for use in diaphragm & plunger pumps. Non-detergent Non-foaming Resists Breakdown Due to Oxid...
View full details
Part# 1603.69 is the oil sight gauge plug on the gear reduction unit. This plug is found on many of the Kappa and Zeta series diaphragm pumps. The ...
View full details
The Udor GG350BM is a direct replacement for the low pressure gauges on Udor control units. This gauge features a 1/4" MNPT connection located on t...
View full details
Part# 6033.01 has been replaced with part # 6033.13. Part# 6033.13 is the replacement oil bowl for most Udor diaphragm pumps. The oil bowl kit com...
View full details
Part # 1101.12 is the o-ring for the suction barb on most Udor Kappa pumps.
The 6062.A9 rebuild kit replaces the main internals on the Udor 6010.93 and 6010.95 regulators. These regulators are are typically found on the Kap...
View full details
Part # 8700.26 is the replacement diaphragm kit for the Udor Kappa-55 diaphragm pump. Udor recommends replacing the pump diaphragms after 500 hours...
View full details
Part # 0254.04 is the 3/4" bypass barb off the control unit. This barb is used to run jet agitation on Gregson-Clark Sprayers.
Part # 0604.18 is the replacement suction barb nut for Udor pumps. You will also need part # 1101.41 which is the o-ring, and part # 0202.52, the b...
View full details
Part # 1101.41 is the o-ring for the suction barb on most Udor Kappa pumps.
The 8701.10 has been superseded by 6062.55, this rebuild kit replaces the main internals on the Udor 6010.24 and 6010.24/LP control units. These co...
View full details
Part # is 6006.01 has been superseded by 6063.04, it is the valve assembly for most Udor Kappa series pumps. As these are sold individually, please...
View full details
Part # 0202.52 is the replacement 1-1/4" suction barb for Udor pumps. You will also need part # 1101.41 which is the o-ring, and part # 0604.18, th...
View full details
Part # GG-350 is the replacement 350 PSI pressure gauge off Udor pressure regulators.
The 6010.93 control unit features right angle entry from the main body for smoother operation and longer life. The regulator includes a manual dump...
View full details
Part # 1204.24 is the replacement urethane poppet used in several Udor pressure regulators.
The 6010.24 regulator can be pump or remote mounted on numerous sprayers. This control unit features two 1/2" ball valve discharge ports and pressu...
View full details
Part # 8700.02 is the replacement diaphragm kit for the Udor Kappa-30/40/50 diaphragm pumps. Udor recommends replacing the pump diaphragms after 50...
View full details
Part # 8700.10 is the replacement diaphragm kit for the Udor Kappa-75 diaphragm pump. Udor recommends replacing the pump diaphragms after 500 hours...
View full details
Part # 6062.C1 has superseded 8700.65 for the Udor Kappa-25 diaphragm pump. Udor recommends replacing the diaphragms after 500 hours. The kit inclu...
View full details
Udor part # 8701.02 has been superseded by 6062.53, this rebuild kit replaces the main internals on the Udor 6047.06 & 6047.06/LP control units...
View full details
The Udor 6010.95 regulator is the same as the 6010.93 except it is fitted with a lighter spring and gauge for lower pressure applications. This reg...
View full details
Udor Kappa 25/43/55 Head Assembly. Part # 6017.13 Superseded by Part # 6017.F2
Part # 8700.01 is the replacement diaphragm kit for the Udor Iota-17 diaphragm pump. Udor recommends diaphragm replacement after 500 hours of use o...
View full details
The Udor 6047.06 is a pump or remote mount control unit with dual 1/2" ball valve discharge ports and pressure gauge. This regulator is rated for 5...
View full details
Udor part 6062.29 replaces 8700.22 and is the replacement diaphragm kit for the Kappa-120 and Kappa-150 diaphragm pumps. Udor recommends replacing...
View full details
Part 6062.E4 replaced 8700.75 and is the replacement diaphragm kit for the Udor Delta-75 diaphragm pump. Udor recommends replacing the pump diaphr...
View full details
This Kappa 55 Complete Pump Rebuild - 8700.26CK is the perfect choice for rebuilding your Kappa 55 pump. It comes with everything you need to get t...
View full details
Part # GG-1000BM is a direct replacement 1000 PSI pressure gauge for Udor regulators. It features 1/4" MPT on the back of the gauge.
The Kappa 43 HP with gear reduction is a three diaphragm pump rated for 560 PSI. The Kappa 43-GR HP comes with adjustable control unit, manual dump...
View full details
