Part # 29.1903.7 is the Udor reinforced polypropylene trigger valve with 1/2" female inlet & outlet ports. This trigger valve provides an excel...
View full details
SAE 40W hydraulic lubricant specially formulated for use in diaphragm & plunger pumps. Non-detergent Non-foaming Resists Breakdown Due to Oxid...
View full details
The 6010.24 regulator can be pump or remote mounted on numerous sprayers. This control unit features two 1/2" ball valve discharge ports and pressu...
View full details
The 6010.93 control unit features right angle entry from the main body for smoother operation and longer life. The regulator includes a manual dump...
View full details
The Udor 6010.95 regulator is the same as the 6010.93 except it is fitted with a lighter spring and gauge for lower pressure applications. This reg...
View full details
The 6062.A9 rebuild kit replaces the main internals on the Udor 6010.93 and 6010.95 regulators. These regulators are are typically found on the Kap...
View full details
Udor part # 8701.02 has been superseded by 6062.53, this rebuild kit replaces the main internals on the Udor 6047.06 & 6047.06/LP control units...
View full details
The 8701.10 has been superseded by 6062.55, this rebuild kit replaces the main internals on the Udor 6010.24 and 6010.24/LP control units. These co...
View full details
The remount mount regulator kit from Udor, Part # 7704.05 is used with standard pumps for remote mounting the following control units 6010.24, 6047...
View full details
Part # 1204.24 is the replacement urethane poppet used in several Udor pressure regulators.
Part number 8700.04 has been superseded by 6062.H2 is the replacement diaphragm kit for the Udor RO-110/130 pumps. Udor recommends replacing the di...
View full details
Udor part number 8700.09 has been superseded by 6062.H3 and is the replacement diaphragm kit for the Udor RO-160 diaphragm pump. Udor recommends re...
View full details
Udor part number 8700.05 is the replacement diaphragm kit for the Udor RO-70 diaphragm pump. Udor recommends replacing he diaphragms after 500 hour...
View full details
Part # 6006.77 is the valve assembly for the Udor RO, Kappa 120, Kappa 150 and Beta pumps. The valve assembly are sold individually, please check t...
View full details
Part # 34.1302.2 is a commercial grade root feeding probe from Udor. The root feeder features a nickel-plated trigger valve with 1/2" FPT swivel in...
View full details
Part # UD-10 has been superseded by 6061.10, it is the replacement seal kit for Udor 22MM G-Series plunger pumps.
Part # UD-11 has been superseded by 6061.11, it is the replacement seal kit for Udor 25MM G-Series plunger pumps.
Part # UD-12 has been superseded by 6061.12 is the replacement seal kit for Udor 28MM G-Series plunger pumps.
Part # UD-28B has been superseded by 6061.28, it is the replacement seal kit for Udor 18MM M-Series plunger pumps. This kit includes both inlet seals.
Part # 1101.41 is the o-ring for the suction barb on most Udor Kappa pumps.
The Udor Turbine Spray Gun is a high performance spraying gun with a 17" barrel featuring 10mm internal tubing with adjustable spray pattern, rangi...
View full details
The Udor Turbo Gun is a high performance spray gun with a 8" barrel. The gun allows for an adjustable spray patter ranging from solid stream to a c...
View full details
