The 500-gallon elliptical tank can be used for stationary or transportable (non DOT) applications. This tank does not have fittings installed, howe...
View full details
Free Standing Leg Tanks are selected when transportable containment is required for indoor or outdoor applications. Leg Tanks are equipped with mol...
View full details
This Gregson-Clark 3-Point Hitch Sprayer Features the following: Robust Category 1 Frame 55-Gallon Tank with suction, agitation lines and strainer...
View full details
The MPU-55-FP skid sprayer fits well in vans and enclosed body vehicles. The smaller foot print makes this unit perfect for operating out of side...
View full details
The 55-gallon Nurse Tank fill system is perfect for fill ride-on sprayers and back pack sprayers. The fill system includes a 55-gallon upright tank...
View full details
The 6-inch vented lid is a direct replacement for the 9-gallon Eco-505 Injection system as well as the Gregson-Clark Spreader-Mate. This is an Arag...
View full details
The LS206 is a 6-mesh screen for Banjo 1-1/2" and 2" Y line strainers. The 6-mesh screens filter to 3360 microns. O.D: 2-3/4" Length: 7"
3/16" drilled-thru compression adapter for use with Coax Gun
Free Standing Leg Tanks are selected when transportable containment is required for indoor or outdoor applications. Leg Tanks are equipped with mol...
View full details
Single, 75-Amp 6-gauge contact. These are used on Gregson-Clark wiring harnesses. The contact is used in the 50-amp housing, part # 5634. Please ...
View full details
Gregson-Clark DI-750-SS Liquid De-Icing Sprayer The Gregson-Clark DI-750-SS is a rugged, job-ready 750-gallon liquid de-icing sprayer built to perf...
View full details
The 8" basket filter fits into tanks with 8" lids and helps prevent clumping when mixing chemicals. The basket measures 8" wide x 9.25" deep
The Strainer Bag is ideal for mixing dry fertilizers and chemicals in jet agitation sprayers. The strainer bag can hold a full bag of urea, saving ...
View full details
The 8" tank lid is a direct replacement for Ace Roto-Mold tanks. The 8" lid also comes with the collar that sets inside the tank for complete repla...
View full details
The 80-gallon Nurse Tank fill system includes a 80-gallon upright tank completely plumbed and wired ready to go. The system uses a 6.0 GPM pump equ...
View full details
The 80-gallon flat bottom utility tank can be used for many applications. The flat bottom tank does not come with a tank fitting, however standard ...
View full details
The LS280 is a 80-mesh screen for Banjo 1-1/2" and 2" Y line strainers. The 80-mesh screens filter to 177 microns. O.D.: 2-3/4" Length: 7"
This Gregson-Clark 85-gallon 3-Point Hitch Sprayer Features the following: Robust Category 1 Frame 85-Gallon Tank with suction, agitation lines an...
View full details
Part # AR550350 (Formerly 9910-550350) is a replacement o-ring for Hypro/ A.R. D-30 pumps.
Part # AR651670 (Formerly 9910-650690, AR65090) is the suction diaphragm clamp for Hypro/ A.R. D-30 pumps.
9940.0007 Hannay 1 1/2" trunion bushing for Hannay Reel guide
The VDR50 control unit, for mounting on pump model AR813 diaphragm pumps, is capable of handling flow rates up to 35 gpm (132.5 lpm) and pressures ...
View full details
Part # ACAL-12 is the replacement pump volute for the Ace GE-660 pump.
