Products

Twin style flat spray tips are best suited for broadcast spraying where superior leaf coverage and canopy penetration are important. Ideal for appl...

The Turfware TR460 ride-on spreader & sprayer provides a robust platform for turf professionals to build their business. Turfware units are con...

The Udor 0004.18 Gear Shaft is a genuine OEM replacement component used in Udor gas engine gear reduction assemblies. Designed for a 3/4-inch engin...

The Udor 0006.01 Bearing is an original equipment replacement bearing manufactured for select Udor diaphragm pumps and gear reduction assemblies. I...

The Udor 0006.02 Bearing is an original equipment replacement bearing designed for select Udor diaphragm pumps. It supports the crankshaft inside t...

The Udor 0006.08 Bearing is an original Udor replacement bearing designed specifically for gear reduction assemblies used on gasoline engine-powere...

The Udor 0006.11 OEM Bearing is an original replacement component designed for Udor gear reduction drives used on gas engine-powered diaphragm and ...

The Udor 0007.01 OEM Oil Seal is an original replacement crankshaft seal manufactured to Udor's exact specifications. Installed where the crankshaf...

The Udor 0007.33 Gear Reduction Oil Seal is an original equipment replacement component designed for compatible Udor diaphragm- and plunger-pump ge...

The Udor 0007.61 D35 Oil Seal is an OEM replacement crankshaft seal for compatible Udor diaphragm pumps. It is installed at the crankshaft/bearing-...

Please note that this item is not part of our regular inventory and will ship directly from the manufacturer. Direct factory processing and dispatc...

The Udor 0102.04 Diaphragm Bolt is an original equipment replacement component used in the diaphragm assembly of compatible Udor agricultural, hort...

The Udor 1 1/4" Inlet Barb Assembly includes all three components for the inlet side of the pump. 1 1/4" is used on most Gregson-Clark Sprayers. In...

Udor 1" Suction Elbow. Reference# 357, Part# 0202.18

Part # 0202.52 is the replacement 1-1/4" suction barb for Udor pumps. You will also need part # 1101.41 which is the o-ring, and part # 0604.18, th...

Udor bolt, Part # 1805.01

Part # 0254.04 is the 3/4" bypass barb off the control unit. This barb is used to run jet agitation on Gregson-Clark Sprayers.

The Udor 3/4" Bypass Barb Assembly includes all three components for the bypass side of the control unit that is used to run jet agitation on Gregs...

The Udor GG350BM is a direct replacement for the low pressure gauges on Udor control units. This gauge features a 1/4" MNPT connection located on t...

The Udor 5027.75 gear reduction is used to connect Udor pumps to 4-6.5 HP engines with a 3/4" keyed shaft. 5027.75 requires 16oz of 90W gear oil.  ...

The Udor 5033.A4 gear reduction is used to connect specific Udor pumps to 8-13 HP engines with a 1" keyed shaft. The 5033.A4 gearbox requires 16oz ...

The Udor 5071.75 gear reduction is used to connect Kappa-33, Kappa-43 and Kappa-53 pumps to 4-6.5 HP engines with a 3/4" keyed shaft.     Udor 507...

The Udor 6005.15 high volume brass pressure regulator features a master on.off lever, 3/4" male BSP inlet port, 1/4" gauge port, and a 1" bypass po...

Udor part # 8701.01 rebuild kit replaces the main internals on the Udor 6010.23 control units. These control units are found on the Iota-20 diaphra...

The Udor 6047.06 is a pump or remote mount control unit with dual 1/2" ball valve discharge ports and pressure gauge. This regulator is rated for 5...

Part # 23.208.84 is the Udor nickel plated aluminum trigger valve with 1/2" female inlet & outlet ports. The stainless steel trigger provides a...

Udor Part # 0214.01, Pump Bearing

* This unit ships via tractor trailer and is unable to process shipping online.  Please call to place order.  The Udor Beta 170 is a 4-cylinder, hi...

Part # 8700.55 has been superseded by 6062.C7 is the replacement diaphragm kit for the Udor Beta-200 and Beta-240 diaphragm pumps. Udor recommends ...

Part # 8700.07 is the replacement diaphragm kit for the Udor Beta-150 and Omega-170 diaphragm pumps. Udor recommends diaphragm replacement after 50...

Udor Bolt, par # 1804.07

Udor part # 1805.04, Bolt

Udor Bolt. Part # 1805.20

Udor part # 1805.21, Bolt

Udor Bolt. Part # 1805.31

Part # 0604.26 is the bypass barb nut on Udor control units.

Part # 1101.12 is the o-ring for the suction barb on most Udor Kappa pumps.

Part # 8700.80 is the replacement diaphragm kit for the Udor Delta 100 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...

Part # 6062.H5 is the replacement diaphragm kit for the Udor Delta 140 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...

Part # 6062.H6 is the replacement valve kit for the Udor Delta 140 diaphragm pumps.  Includes: (6) 1101.J4 (6) 6006.97

* This unit ships via tractor trailer and is unable to process shipping online.  Please call to place order.  The Udor Delta 140 is a 3-cylinder, h...

Part # 6062.H7 is the replacement diaphragm kit for the Udor Delta 170 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...

Part # 6062.24 is the diaphragm bolt and washer kit for the Udor Delta 170 diaphragm pump.  Includes: (4) 0102.01 (4) 0301.07

Part # 6062.H8 is the replacement valve kit for Udor Delta 170 diaphragm pumps.  This kit includes 8 replacement valves (6006.97) and 8 replacement...

Part # 8700.75CK is the complete rebuild kit for the Delta-75 diaphragm pump. This kit contains everything needed for a complete pump rebuild.  Inc...

6062.E6 is the replacement valve kit for the Delta-75 pumps. The kit includes 6 new valves (6063.04) and 6 valve o-rings (1101.31).