Products

The 8701.10 has been superseded by 6062.55, this rebuild kit replaces the main internals on the Udor 6010.24 and 6010.24/LP control units. These co...

The 6062.A9 rebuild kit replaces the main internals on the Udor 6010.93 and 6010.95 regulators. These regulators are are typically found on the Kap...

The remount mount regulator kit from Udor, Part # 7704.05 is used with standard pumps for remote mounting the following control units 6010.24, 6047...

Part # 1204.24 is the replacement urethane poppet used in several Udor pressure regulators.

Part number 8700.04 has been superseded by 6062.H2 is the replacement diaphragm kit for the Udor RO-110/130 pumps. Udor recommends replacing the di...

Udor part number 8700.09 has been superseded by 6062.H3 and is the replacement diaphragm kit for the Udor RO-160 diaphragm pump. Udor recommends re...

Udor part number 8700.05 is the replacement diaphragm kit for the Udor RO-70 diaphragm pump. Udor recommends replacing he diaphragms after 500 hour...

Part # 6006.77 is the valve assembly for the Udor RO, Kappa 120, Kappa 150 and Beta pumps. The valve assembly are sold individually, please check t...

Part # 34.1302.2 is a commercial grade root feeding probe from Udor. The root feeder features a nickel-plated trigger valve with 1/2" FPT swivel in...

Part #6061.10 is the replacement seal kit for Udor 22MM G-Series plunger pumps.

Udor Part # 0302.50, Pump Spacer

Organize and protect your equipment with these durable spray gun holders that are made of UV resistant co-polymer materials. Spray gun holders ca b...

Organize and protect your equipment with these durable spray gun holders that are made of UV resistant co-polymer materials. Spray gun holders ca b...

Part # 1101.41 is the o-ring for the suction barb on most Udor Kappa pumps.

The Udor Turbine Spray Gun is a high performance spraying gun with a 17" barrel featuring 10mm internal tubing with adjustable spray pattern, rangi...

The Udor Turbo Gun is a high performance spray gun with a 8" barrel. The gun allows for an adjustable spray patter ranging from solid stream to a c...

Part # is 6006.01 has been superseded by 6063.04, it is the valve assembly for most Udor Kappa series pumps. As these are sold individually, please...

Udor Washer. Part # 1403.07

Udor Washer. Part # 1403.09

The Udor ZETA-40P/GR combines the compact ZETA-40P three-diaphragm pump with a direct-mount gasoline-engine gear reduction, creating a durable and ...

6063.Q5 is the valve assembly for the Udor Zeta pumps. The valve assembly are sold individually.

The Udor ZETA-120/GR is a high-flow, gas-engine-driven, 3 cylinder diaphragm pump designed for agricultural, horticultural, commercial spraying, fi...

  Please note that this item is not part of our regular inventory and will ship directly from the manufacturer. Direct factory processing and dispa...

Part # 6062.97 superseded 8700.60, it is the replacement diaphragm kit for the Udor Zeta-40/85 diaphragm pumps. This rebuild kit also works for the...

The Udor ZETA-40P is a compact, low-pressure positive-displacement diaphragm pump built for applications where chemical resistance and reliable flo...

The Udor ZETA-85GR5 combines the proven ZETA 85 three-diaphragm pump with a compact factory gear reduction for gasoline-engine-driven commercial sp...

The Udor ZETA-85P is a low-pressure positive-displacement diaphragm pump built for demanding commercial spraying and aggressive-fluid applications....

The Udor ZETA-85P/GR5 combines the chemical resistance of Udor's ZETA-85P poly diaphragm pump with a factory-installed gear reduction, making it an...

Part # UV15163 is the replacement o-ring from the Banjo 1/2" drain plug (12777).

The V-100 ST skid sprayer fits well in medium and full sized pickup trucks. The smaller foot print also makes this sprayer perfect for vans and enc...

The V-100/100 TS-43 tree sprayer uses the tank/frame assembly from the V-100 and upgrades the pumping system to a high pressure Kappa-43. Adding a...

The V-100E electric skid sprayer fits well in medium and full sized pickup trucks. The smaller foot print also makes this unit perfect for van...

The V-150 ST skid sprayer offers the largest capacity available for full sized pickup trucks without obstructing the rear window.  Gregson-Clark sp...

The V-200 ST skid sprayer is our most popular model. The 200-gallon capacity fits well in full sized pickup trucks while leaving plenty of room for...

Our most popular Skid Sprayer is now available with aluminum framework. The 200-gallon capacity fits well in full sized pickup trucks while leaving...

The V-200 TS-55 tree sprayer uses the tank/frame from the V-200 to provide a unit that fits well in full sized pickup trucks while leaving plenty o...

The V-300 TS-75 tree sprayer uses the tank/frame assembly from the V-300 and upgrades the pumping system, hose reel, hose and spray gun to deliver ...

Offering the largest capacity of the V-Series Sprayers the V-300 ST keeps you in the field longer. Tank orientation is front to back which allows t...

Compact, lightweight and inexpensive, the V-50 ST Skid Sprayer is ideal for pest control, weed spraying or as a dedicated unit for special servi...

The V-RGA is a add-on component for existing V-Series Skid Sprayers. This assembly comes with all the mounting hardware needed to mount the Hannay ...

Part # 38527 is the replacement valve spring for JD9 spray guns.

Part # 38528 is the replacement valve stem for JD9 spray guns.

Part # 20511-00 is the 1/2" hose barb 90 degree x ORS. This fitting comes with the required O-ring. This is used with the low flow indicators and t...

Part # 20511-00 is the 3/8" hose barb 90 degree x ORS. This does come with the required O-ring. This fitting is used on the low flow indicator and ...

Flow indicators allow sprayer operators to visually monitor the flow of the system to spray tips and orifices. The floating balls in the indicator ...

Flow indicators allow sprayer operators to visually monitor the flow of the system to spray tips and orifices. The floating ball in the indicator b...

Part # 20524-00 is the Wilger ORS Male x ORS Female Tee with a 3/8" port. This is to be used with both the low flow indicators and the standard ind...

Part # 20521-00 is the ORS cap to the Wilger Flow Indicators. This is to be used with both the low flow indicators and the standard indicators.