Udor 3/4" Bypass Barb
Part # 0254.04 is the 3/4" bypass barb off the control unit. This barb is used to run jet agitation on Gregson-Clark Sprayers.
Part # 0254.04 is the 3/4" bypass barb off the control unit. This barb is used to run jet agitation on Gregson-Clark Sprayers.
The Udor GG350BM is a direct replacement for the low pressure gauges on Udor control units. This gauge features a 1/4" MNPT connection located on t...
View full detailsThe Udor 5027.75 gear reduction is used to connect Udor pumps to 4-6.5 HP engines with a 3/4" keyed shaft. 5027.75 requires 16oz of 90W gear oil. ...
View full detailsThe Udor 5033.A4 gear reduction is used to connect specific Udor pumps to 8-13 HP engines with a 1" keyed shaft. The 5033.A4 gearbox requires 16oz ...
View full detailsThe Udor 5071.75 gear reduction is used to connect Kappa-33, Kappa-43 and Kappa-53 pumps to 4-6.5 HP engines with a 3/4" keyed shaft. ...
View full detailsThe Udor 6005.15 high volume brass pressure regulator features a master on.off lever, 3/4" male BSP inlet port, 1/4" gauge port, and a 1" bypass po...
View full detailsUdor part # 8701.01 rebuild kit replaces the main internals on the Udor 6010.23 control units. These control units are found on the Iota-20 diaphra...
View full detailsThe Udor 6047.06 is a pump or remote mount control unit with dual 1/2" ball valve discharge ports and pressure gauge. This regulator is rated for 5...
View full detailsPart # 23.208.84 is the Udor nickel plated aluminum trigger valve with 1/2" female inlet & outlet ports. The stainless steel trigger provides a...
View full details* This unit ships via tractor trailer and is unable to process shipping online. Please call to place order. The Udor Beta 170 is a 4-cylinder, hi...
View full detailsPart # 8700.55 has been superseded by 6062.C7 is the replacement diaphragm kit for the Udor Beta-200 and Beta-240 diaphragm pumps. Udor recommends ...
View full detailsPart # 8700.07 is the replacement diaphragm kit for the Udor Beta-150 and Omega-170 diaphragm pumps. Udor recommends diaphragm replacement after 50...
View full detailsPart # UD-29 has been superseded by 6061.29, it is the replacement brass kit for Udor 18MM M-Series piston pumps.
Part # 1101.12 is the o-ring for the suction barb on most Udor Kappa pumps.
Part # 8700.80 is the replacement diaphragm kit for the Udor Delta 100 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...
View full detailsPart # 6062.H5 is the replacement diaphragm kit for the Udor Delta 140 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...
View full detailsSign-up for Gregson-Clark email updates.
Gregson-Clark Spraying Equipment
3213 Lehigh Street
Caledonia, NY 14423
Monday – Friday, 8 AM – 5 PM EST
Toll-Free: 1-800-706-9530
Local: (585) 538-9570
Fax: (585) 538-9577
Parts/Accessories
Matt@gregsonclark.com
Sales
Zack@gregsonclark.com
Copyright © 2025 Gregson-Clark Spraying Equipment.
Rhett M Clark Inc. All Rights Reserved. Powered by Shopify