Part # 6062.46 is the complete valve kit for the Udor Kappa43 and Kappa-55 diaphragm pumps. The kit includes 6 valves (6063.04) and 6 o-rings (1101...
View full details
Replacement Tips for Udor Long Range Spray Gun 13.901.151. NOTE: The Udor Long Range Spray Gun comes stock with 3.5mm spray tip 13.1802.73
The Udor Long Range Spray Gun is a high performance spray gun with a 21" barrel featuring 12mm internal tubing with stream straightener and adjusta...
View full details
Part #6061.29 is the replacement brass kit for Udor 18MM M-Series piston pumps.
Part # 6061.28 is the replacement seal kit for Udor 18MM M-Series plunger pumps. This kit includes both inlet seals.
Part # 6061.30 is the replacement valve kit for Udor MK-Series plunger pumps. This kit includes replacement valves and o-rings.
Part# 6033.01 has been replaced with part # 6033.13. Part# 6033.13 is the replacement oil bowl for most Udor diaphragm pumps. The oil bowl kit com...
View full details
Part# 6033.02 has been replaced with part # 6033.12. Part# 6033.12 is the replacement oil bowl for larger Udor diaphragm pumps. The oil bowl kit c...
View full details
Part# 1603.69 is the oil sight gauge plug on the gear reduction unit. This plug is found on many of the Kappa and Zeta series diaphragm pumps. The ...
View full details
Part # 29.1903.7 is the Udor reinforced polypropylene trigger valve with 1/2" female inlet & outlet ports. This trigger valve provides an excel...
View full details
SAE 40W hydraulic lubricant specially formulated for use in diaphragm & plunger pumps. Non-detergent Non-foaming Resists Breakdown Due to Oxid...
View full details
The 6010.24 regulator can be pump or remote mounted on numerous sprayers. This control unit features two 1/2" ball valve discharge ports and pressu...
View full details
& The 6010.93 control unit features right angle entry from the main body for smoother operation and longer life. The regulator includes a manua...
View full details
The Udor 6010.95 regulator is the same as the 6010.93 except it is fitted with a lighter spring and gauge for lower pressure applications. This reg...
View full details
Udor part # 8701.02 has been superseded by 6062.53, this rebuild kit replaces the main internals on the Udor 6047.06 & 6047.06/LP control units...
View full details
The 8701.10 has been superseded by 6062.55, this rebuild kit replaces the main internals on the Udor 6010.24 and 6010.24/LP control units. These co...
View full details
The 6062.A9 rebuild kit replaces the main internals on the Udor 6010.93 and 6010.95 regulators. These regulators are are typically found on the Kap...
View full details
The remount mount regulator kit from Udor, Part # 7704.05 is used with standard pumps for remote mounting the following control units 6010.24, 6047...
View full details
Part # 1204.24 is the replacement urethane poppet used in several Udor pressure regulators.
Part number 8700.04 has been superseded by 6062.H2 is the replacement diaphragm kit for the Udor RO-110/130 pumps. Udor recommends replacing the di...
View full details
Udor part number 8700.09 has been superseded by 6062.H3 and is the replacement diaphragm kit for the Udor RO-160 diaphragm pump. Udor recommends re...
View full details
