The 500-gallon elliptical tank can be used for stationary or transportable (non DOT) applications. This tank does not have fittings installed, howe...
View full details
Free Standing Leg Tanks are selected when transportable containment is required for indoor or outdoor applications. Leg Tanks are equipped with mol...
View full details
This Gregson-Clark 3-Point Hitch Sprayer Features the following: Robust Category 1 Frame 55-Gallon Tank with suction, agitation lines and strainer...
View full details
The MPU-55-FP skid sprayer fits well in vans and enclosed body vehicles. The smaller foot print makes this unit perfect for operating out of side...
View full details
The 55-gallon Nurse Tank fill system is perfect for fill ride-on sprayers and back pack sprayers. The fill system includes a 55-gallon upright tank...
View full details
The 6-inch vented lid is a direct replacement for the 9-gallon Eco-505 Injection system as well as the Gregson-Clark Spreader-Mate. This is an Arag...
View full details
The LS206 is a 6-mesh screen for Banjo 1-1/2" and 2" Y line strainers. The 6-mesh screens filter to 3360 microns. O.D: 2-3/4" Length: 7"
3/16" drilled-thru compression adapter for use with Coax Gun
Free Standing Leg Tanks are selected when transportable containment is required for indoor or outdoor applications. Leg Tanks are equipped with mol...
View full details
Single, 75-Amp 6-gauge contact. These are used on Gregson-Clark wiring harnesses. The contact is used in the 50-amp housing, part # 5634. Please ...
View full details
Gregson-Clark DI-750-SS Liquid De-Icing Sprayer The Gregson-Clark DI-750-SS is a rugged, job-ready 750-gallon liquid de-icing sprayer built to perf...
View full details
The 8" basket filter fits into tanks with 8" lids and helps prevent clumping when mixing chemicals. The basket measures 8" wide x 9.25" deep
The Strainer Bag is ideal for mixing dry fertilizers and chemicals in jet agitation sprayers. The strainer bag can hold a full bag of urea, saving ...
View full details
The 8" tank lid is a direct replacement for Ace Roto-Mold tanks. The 8" lid also comes with the collar that sets inside the tank for complete repla...
View full details
The 80-gallon Nurse Tank fill system includes a 80-gallon upright tank completely plumbed and wired ready to go. The system uses a 6.0 GPM pump equ...
View full details
The 80-gallon flat bottom utility tank can be used for many applications. The flat bottom tank does not come with a tank fitting, however standard ...
View full details
The LS280 is a 80-mesh screen for Banjo 1-1/2" and 2" Y line strainers. The 80-mesh screens filter to 177 microns. O.D.: 2-3/4" Length: 7"
This Gregson-Clark 85-gallon 3-Point Hitch Sprayer Features the following: Robust Category 1 Frame 85-Gallon Tank with suction, agitation lines an...
View full details
Part # AR550350 (Formerly 9910-550350) is a replacement o-ring for Hypro/ A.R. D-30 pumps.
Part # AR651670 (Formerly 9910-650690, AR65090) is the suction diaphragm clamp for Hypro/ A.R. D-30 pumps.
9940.0007 Hannay 1 1/2" trunion bushing for Hannay Reel guide
The VDR50 control unit, for mounting on pump model AR813 diaphragm pumps, is capable of handling flow rates up to 35 gpm (132.5 lpm) and pressures ...
View full details
Part # ACAL-12 is the replacement pump volute for the Ace GE-660 pump.
Part # ACAL-28-660 is the replacement impeller for Ace GE-660 centrifugal pumps.
Ace roller pumps have returned to the market to provide a reliable, dependable and American made products to consumers. The new Ace roller pump l...
View full details
Part # RK-RP-600 is the replacement rebuild kit for the Ace 600C roller pump. This kit includes replacement seals, o-rings and rollers.
Ace roller pumps have returned to the market to provide a reliable, dependable and American made products to consumers. The new Ace roller pump l...
View full details
Part # RK-RP-800 is the replacement rebuild kit for the Ace 800C roller pump. This kit includes replacement seals, o-rings and rollers.
Part # Bac-7V is the Viton, carbon ceramic seal kit for the ACE GE660, FMC-200, PTOC-600 and many other Ace pumps.
Part # RK-GE-660 is the repair kit for the Ace GE-660 centrifugal pump. The kit includes replacement seal, o-ring, washers and thread-locker.
The ace GE-660 Centrifugal pump features a 1-1/2" inlet with a 1-1/4" outlet and is capable of 115 PSI max and 110 GPM max. The impeller connects t...
View full details
The ace GE-660-EC is an E-Coated Centrifugal pump features a 1-1/2" inlet with a 1-1/4" outlet and is capable of 115 PSI max and 110 GPM max. The i...
View full details
Barske Tall Blade Impeller Design -Higher Pressures at Standard EngineSpeeds Suction 1” NPT x Discharge 3/4” NPT Maximum Pressure 57 PSI and M...
View full details
2"NPT suction 1 1/2" NPT Discharge MAXIMUM PRESSURE: 140 PSI (9.7 BAR) MAXIMUM FLOW: 140 GPM (530 LPM) Impeller attaches directly to 1 " (2.54 cm...
View full details
Part# RK-BAC-75-HYD is a rebuild kit for the hydraulic motor on some Ace Pumps. Check your owners manual for the proper kit.
Part# RK-FMC is a replacement seal kit for a wide variety of Ace Centrifugal Pumps. The kit included the BAC-7V seal and BAC-4A o-ring.
Part# RK-FMC-150 is a replacement seal kit for Ace FMC-150 pumps. The kit included the BAC-7V seal, Bac-24-HYD-SS washer, 40160 O-ring and BAC-4A-1...
View full details
Part# RK-GE-650 is the rebuild kit for the Ace GE-650 Centrifugal Pumps.
Part# RK-GE-800/1600 is the replacement seal kit for Ace GE-800 and Ace GE-1600 pumps. The Kit Includes: 1 - Type 21-1.25 - Mechanical Seal, Viton1...
View full details
Part# RK-GE-860/1660 is the rebuild kit for the Ace GE-860 and Ace GE-1660 Centrifugal Pumps.
Agitator tube assembly for 100/150-gallon PCO tanks. This is the stock agitation assembly on Gregson-Clark 100/150-gallon modular tanks and 100/15...
View full details
Agitator tube assembly for 200/300-gallon PCO tanks. This is the stock agitation assembly on Gregson-Clark 200/300-gallon modular tanks and 200/30...
View full details
