8" Basket Filter
$28.95
The 8" basket filter fits into tanks with 8" lids and helps prevent clumping when mixing chemicals. The basket measures 8" wide x 9.25" deep
$28.95
Products
8" Strainer Bag
$42.00
The Strainer Bag is ideal for mixing dry fertilizers and chemicals in jet agitation sprayers. The strainer bag can hold a full bag of urea, saving ...
View full details
$42.00
8" Vented Tank Lid
$28.68
The 8" tank lid is a direct replacement for Ace Roto-Mold tanks. The 8" lid also comes with the collar that sets inside the tank for complete repla...
View full details
$28.68
80-Gallon Fill System
$979.00
The 80-gallon Nurse Tank fill system includes a 80-gallon upright tank completely plumbed and wired ready to go. The system uses a 6.0 GPM pump equ...
View full details
$979.00
80-Gallon Utility Tank w/Suport Band
$399.00
The 80-gallon flat bottom utility tank can be used for many applications. The flat bottom tank does not come with a tank fitting, however standard ...
View full details
$399.00
80-Mesh Banjo Y Strainer Screen
$51.52
The LS280 is a 80-mesh screen for Banjo 1-1/2" and 2" Y line strainers. The 80-mesh screens filter to 177 microns. O.D.: 2-3/4" Length: 7"
$51.52
85-Gallon 3-Point Hitch Sprayer (cat. 1)
from $4,394.00
This Gregson-Clark 85-gallon 3-Point Hitch Sprayer Features the following: Robust Category 1 Frame 85-Gallon Tank with suction, agitation lines an...
View full details
from $4,394.00
9910-550350 O-Ring
$1.53
Part # AR550350 (Formerly 9910-550350) is a replacement o-ring for Hypro/ A.R. D-30 pumps.
$1.53
9910-650690 Suction Diaphragm Clamp
$20.23
Part # AR651670 (Formerly 9910-650690, AR65090) is the suction diaphragm clamp for Hypro/ A.R. D-30 pumps.
$20.23
9940.0007 Hannay 1 1/2" trunion bushing
$3.50
9940.0007 Hannay 1 1/2" trunion bushing for Hannay Reel guide
$3.50
A.R. VDR50 Control Unit
$390.00
The VDR50 control unit, for mounting on pump model AR813 diaphragm pumps, is capable of handling flow rates up to 35 gpm (132.5 lpm) and pressures ...
View full details
$390.00
ACAL-12 - Pump Volute
$310.06
Part # ACAL-12 is the replacement pump volute for the Ace GE-660 pump.
$310.06
ACAL-28-660 - Impeller
$357.60
Part # ACAL-28-660 is the replacement impeller for Ace GE-660 centrifugal pumps.
$357.60
Ace 600C Roller Pump
$248.80
Ace roller pumps have returned to the market to provide a reliable, dependable and American made products to consumers. The new Ace roller pump l...
View full details
$248.80
Ace 600C Roller Pump Rebuild Kit
$62.10
Part # RK-RP-600 is the replacement rebuild kit for the Ace 600C roller pump. This kit includes replacement seals, o-rings and rollers.
$62.10
Ace 800C Roller Pump
$326.40
Ace roller pumps have returned to the market to provide a reliable, dependable and American made products to consumers. The new Ace roller pump l...
View full details
$326.40
Ace 800C Roller Pump Rebuild Kit
$85.95
Part # RK-RP-800 is the replacement rebuild kit for the Ace 800C roller pump. This kit includes replacement seals, o-rings and rollers.
$85.95
Ace BAC-7V Seal Kit
$64.00
Part # Bac-7V is the Viton, carbon ceramic seal kit for the ACE GE660, FMC-200, PTOC-600 and many other Ace pumps.
$64.00
ACE GE-660 Seal Kit
$91.35
Part # RK-GE-660 is the repair kit for the Ace GE-660 centrifugal pump. The kit includes replacement seal, o-ring, washers and thread-locker.
$91.35
Ace GE-660-LE Centrifugal Pump
$598.46
The ace GE-660 Centrifugal pump features a 1-1/2" inlet with a 1-1/4" outlet and is capable of 115 PSI max and 110 GPM max. The impeller connects t...
View full details
$598.46
Ace GE-660-LE-EC Centrifugal Pump
$778.60
The ace GE-660-EC is an E-Coated Centrifugal pump features a 1-1/2" inlet with a 1-1/4" outlet and is capable of 115 PSI max and 110 GPM max. The i...
View full details
$778.60
ACE GE-85-LE centrifugal pump (Less engine)
$328.00
Barske Tall Blade Impeller Design -Higher Pressures at Standard EngineSpeeds Suction 1” NPT x Discharge 3/4” NPT Maximum Pressure 57 PSI and M...
View full details
$328.00
ACE GE-860-LE centrifugal pump (Less engine)
$1,511.10
2"NPT suction 1 1/2" NPT Discharge MAXIMUM PRESSURE: 140 PSI (9.7 BAR) MAXIMUM FLOW: 140 GPM (530 LPM) Impeller attaches directly to 1 " (2.54 cm...
View full details
$1,511.10
Ace RK-BAC-75-HYD Seal Kit
$139.50
Part# RK-BAC-75-HYD is a rebuild kit for the hydraulic motor on some Ace Pumps. Check your owners manual for the proper kit.
$139.50
Ace RK-FMC Seal Kit
$76.00
Part# RK-FMC is a replacement seal kit for a wide variety of Ace Centrifugal Pumps. The kit included the BAC-7V seal and BAC-4A o-ring.
$76.00
Ace RK-FMC-150 Seal Kit
$76.00
Part# RK-FMC-150 is a replacement seal kit for Ace FMC-150 pumps. The kit included the BAC-7V seal, Bac-24-HYD-SS washer, 40160 O-ring and BAC-4A-1...
View full details
$76.00
Ace RK-GE-650 Seal Kit
$113.00
Part# RK-GE-650 is the rebuild kit for the Ace GE-650 Centrifugal Pumps.
$113.00
Ace RK-GE-800/1600 Seal Kit
$187.25
Part# RK-GE-800/1600 is the replacement seal kit for Ace GE-800 and Ace GE-1600 pumps. The Kit Includes: 1 - Type 21-1.25 - Mechanical Seal, Viton1...
View full details
$187.25
Ace RK-GE-860/1660 Seal Kit
$186.98
Part# RK-GE-860/1660 is the rebuild kit for the Ace GE-860 and Ace GE-1660 Centrifugal Pumps.
$186.98
Agitator Tube Assembly - PCO 100/150
$89.00
Agitator tube assembly for 100/150-gallon PCO tanks. This is the stock agitation assembly on Gregson-Clark 100/150-gallon modular tanks and 100/15...
View full details
$89.00
Agitator Tube Assembly - PCO 200/300
$89.00
Agitator tube assembly for 200/300-gallon PCO tanks. This is the stock agitation assembly on Gregson-Clark 200/300-gallon modular tanks and 200/30...
View full details
$89.00