Udor 6005.15 Regulator
Estimated Ship Date: 05/01 The Udor 6005.15 high volume brass pressure regulator features a master on.off lever, 3/4" male BSP inlet port, 1/4" g...
View full detailsWith so many different pumps available, the options can be confusing. Our goal is not just to sell you a pump, we want to help you choose the right pump for your application. We welcome your phone call to discuss your application needs. Listed below are several pump brands we stock. For a full selection from each manufacture please use the filters to the left.
If you're not sure which brand would best suit your needs, a quick overview of each brand is below.
Each brand offers an extensive selection that is readily available. Due to the vast selection of pumps and replacement parts, our entire selection is yet to be all online. If there is a specific pump or part you are looking that is not listed online please call us, we'd be more than happy to help.
Estimated Ship Date: 05/01 The Udor 6005.15 high volume brass pressure regulator features a master on.off lever, 3/4" male BSP inlet port, 1/4" g...
View full details
Part # 8700.65CK is the complete rebuild kit for Udor Kappa-25 diaphragm pump. This kit includes everything needed for a complete pump rebuild. In...
View full details
Part # 6061.28 is the replacement seal kit for Udor 18MM M-Series plunger pumps. This kit includes both inlet seals.
The Delta 75 and Honda GX 390 electric start 13.0 HP engine is perfect for updating existing spray units. Installing the new pump and engine is a b...
View full details
Udor Delta-75/GR medium pressure diaphragm pumps are excellent for various horticultural, agricultural, lawn care, nursery and turf spraying applic...
View full details
Part # 6062.H6 is the replacement valve kit for the Udor Delta 140 diaphragm pumps. Includes: (6) 1101.J4 (6) 6006.97
Part # 6062.H8 is the replacement valve kit for Udor Delta 170 diaphragm pumps. This kit includes 8 replacement valves (6006.97) and 8 replacement...
View full details
6062.E6 is the replacement valve kit for the Delta-75 pumps. The kit includes 6 new valves (6063.04) and 6 valve o-rings (1101.31).
The Udor 5027.75 gear reduction is used to connect Udor pumps to 4-6.5 HP engines with a 3/4" keyed shaft. 5027.75 requires 16oz of 90W gear oil. ...
View full details
Part #6061.29 is the replacement brass kit for Udor 18MM M-Series piston pumps.
Part #6061.11 is the replacement seal kit for Udor 25MM G-Series plunger pumps.
The Delta 100/GR is a 4-cylinder, medium pressure diaphragm pump with pulsation dampener and control unit. The control unit features an adjustable ...
View full details
The Udor Kappa 55 WOC is the kappa 55 diaphragm pump with no gear reduction or control unit. This pump is commonly purchased to replace a broken pu...
View full details
The Kappa 55 GR-5 is a 15 GPM three diaphragm pump with gear reduction, and adjustable control unit. The gear reduction comes attached to the pump ...
View full details
The Udor Kappa 43 WOC is the kappa 43 diaphragm pump with no gear reduction or control unit. This pump is commonly purchased to replace a broken pu...
View full details
The Kappa 43 GR LP is a three diaphragm pump complete with control unit and gear box. The control unit features an adjustable pressure regulator , ...
View full details
Part # 8700.07 is the replacement diaphragm kit for the Udor Beta-150 and Omega-170 diaphragm pumps. Udor recommends diaphragm replacement after 50...
View full details
Part# 6033.02 has been replaced with part # 6033.12. Part# 6033.12 is the replacement oil bowl for larger Udor diaphragm pumps. The oil bowl kit c...
View full details
Part # 6062.H7 is the replacement diaphragm kit for the Udor Delta 170 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...
View full details
Part #6061.12 is the replacement seal kit for Udor 28MM G-Series plunger pumps.
The Iota 20/GR is an internally manifolded, two-diaphragm pump with anodized aluminum and stainless-steel construction. The Iota 20/GR model comes...
View full details
The Udor Delta 40/GR is a 2-cylinder, medium pressure diaphragm pump with pulsation dampener and control unit. The control unit features an adjusta...
View full details
The Kappa 43 LP and Honda 5.5 HP pump and engine package is perfect for updating existing spray units. The pump package is great for busy professio...
View full details
Part # 6006.21 is the valve assembly for the Udor Iota pumps. The valve assembly are sold individually. These valves fit the Iota 17, 18, and 20
Sign-up for Gregson-Clark email updates.
Gregson-Clark Spraying Equipment
3213 Lehigh Street
Caledonia, NY 14423
Monday – Friday, 8 AM – 5 PM EST
Toll-Free: 1-800-706-9530
Local: (585) 538-9570
Fax: (585) 538-9577
Parts/Accessories
Matt@gregsonclark.com
Sales
Zack@gregsonclark.com
Copyright © 2026 Gregson-Clark Spraying Equipment.
Rhett M Clark Inc. All Rights Reserved. Powered by Shopify