The Udor 5033.A4 gear reduction is used to connect specific Udor pumps to 8-13 HP engines with a 1" keyed shaft. The 5033.A4 gearbox requires 16oz ...
View full details
The Udor 5071.75 gear reduction is used to connect Kappa-33, Kappa-43 and Kappa-53 pumps to 4-6.5 HP engines with a 3/4" keyed shaft. Udor 507...
View full details
The Udor 6005.15 high volume brass pressure regulator features a master on.off lever, 3/4" male BSP inlet port, 1/4" gauge port, and a 1" bypass po...
View full details
Udor part # 8701.01 rebuild kit replaces the main internals on the Udor 6010.23 control units. These control units are found on the Iota-20 diaphra...
View full details
The Udor 6047.06 is a pump or remote mount control unit with dual 1/2" ball valve discharge ports and pressure gauge. This regulator is rated for 5...
View full details
Part # 23.208.84 is the Udor nickel plated aluminum trigger valve with 1/2" female inlet & outlet ports. The stainless steel trigger provides a...
View full details
* This unit ships via tractor trailer and is unable to process shipping online. Please call to place order. The Udor Beta 170 is a 4-cylinder, hi...
View full details
Part # 8700.55 has been superseded by 6062.C7 is the replacement diaphragm kit for the Udor Beta-200 and Beta-240 diaphragm pumps. Udor recommends ...
View full details
Part # 8700.07 is the replacement diaphragm kit for the Udor Beta-150 and Omega-170 diaphragm pumps. Udor recommends diaphragm replacement after 50...
View full details
Part # 1101.12 is the o-ring for the suction barb on most Udor Kappa pumps.
Part # 8700.80 is the replacement diaphragm kit for the Udor Delta 100 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...
View full details
Part # 6062.H5 is the replacement diaphragm kit for the Udor Delta 140 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...
View full details
Part # 6062.H6 is the replacement valve kit for the Udor Delta 140 diaphragm pumps. Includes: (6) 1101.J4 (6) 6006.97
* This unit ships via tractor trailer and is unable to process shipping online. Please call to place order. The Udor Delta 140 is a 3-cylinder, h...
View full details
Part # 6062.H7 is the replacement diaphragm kit for the Udor Delta 170 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...
View full details
Part # 6062.24 is the diaphragm bolt and washer kit for the Udor Delta 170 diaphragm pump. Includes: (4) 0102.01 (4) 0301.07
Part # 6062.H8 is the replacement valve kit for Udor Delta 170 diaphragm pumps. This kit includes 8 replacement valves (6006.97) and 8 replacement...
View full details
Part # 8700.75CK is the complete rebuild kit for the Delta-75 diaphragm pump. This kit contains everything needed for a complete pump rebuild. Inc...
View full details
6062.E6 is the replacement valve kit for the Delta-75 pumps. The kit includes 6 new valves (6063.04) and 6 valve o-rings (1101.31).
Delta-75 medium pressure diaphragm pumps are excellent for various horticultural, agricultural, lawn care, nursery and turf spraying applications. ...
View full details
Udor Delta-75/GR medium pressure diaphragm pumps are excellent for various horticultural, agricultural, lawn care, nursery and turf spraying applic...
View full details
Part #6061.11 is the replacement seal kit for Udor 25MM G-Series plunger pumps.
Part #6061.12 is the replacement seal kit for Udor 28MM G-Series plunger pumps.
Part # 6061.03 is the replacement valve kit for Udor G-Series plunger pumps. The kit comes with 6 new valves and o-rings.
Udor part# 8711.03 is the rebuild kit for several Udor spray guns. Please use the parts breakdowns to determine if this is the correct rebuild kit ...
View full details
Udor part# 9920-Kit10/11 is the rebuild kit for the Udor Turbine and Udor Long Range spray guns. Please use the parts breakdowns to determine if th...
View full details
The Udor Industrial Turbo Mist Gun is a high performance spray gun with a 8" barrel and nickel plated trigger valve with stainless steel trigger an...
View full details
Part # 0604.18 is the replacement suction barb nut for Udor pumps. You will also need part # 1101.41 which is the o-ring, and part # 0202.52, the b...
View full details
Part # 8700.01 is the replacement diaphragm kit for the Udor Iota-17 diaphragm pump. Udor recommends diaphragm replacement after 500 hours of use o...
View full details
The Iota 20/GR is an internally manifolded, two-diaphragm pump with anodized aluminum and stainless-steel construction. The Iota 20/GR model comes...
View full details
The Iota 20 is an internally manifolded, two-diaphragm pump with anodized aluminum and stainless-steel construction. The Iota 20 comes with adjust...
View full details
Part # 6006.21 is the valve assembly for the Udor Iota pumps. The valve assembly are sold individually. These valves fit the Iota 17, 18, and 20
The Udor Kappa 18 12 volt diaphragm pumps is a two diaphragm pump with pulsation dampener. This diaphragm pump comes equipped with a heavy duty 12-...
View full details
The Kappa 25 GR is a two diaphragm pump with gear reduction, pulsation dampener and control unit. The control unit features an adjustable pressure ...
View full details
Part# 6017.06 is the replacement head for the kappa 30, kappa 40, kappa 75, and kappa 100. To ensure this pump head fits your Udor diaphragm pump p...
View full details
Part # 0501.85 is manifold cover on the Kappa 35 and Kappa 55.
The Udor Kappa 43 is a three diaphragm pump complete with control unit. The control unit features an adjustable pressure regulator, manual dump lev...
View full details
