Udor Inlet Barb Nut
Part # 0604.18 is the replacement suction barb nut for Udor pumps. You will also need part # 1101.41 which is the o-ring, and part # 0202.52, the b...
View full details
Part # 0604.18 is the replacement suction barb nut for Udor pumps. You will also need part # 1101.41 which is the o-ring, and part # 0202.52, the b...
View full details
Part # 8700.01 is the replacement diaphragm kit for the Udor Iota-17 diaphragm pump. Udor recommends diaphragm replacement after 500 hours of use o...
View full details
The Iota 20/GR is an internally manifolded, two-diaphragm pump with anodized aluminum and stainless-steel construction. The Iota 20/GR model comes...
View full details
The Iota 20 is an internally manifolded, two-diaphragm pump with anodized aluminum and stainless-steel construction. The Iota 20 comes with adjust...
View full details
Part # 6006.21 is the valve assembly for the Udor Iota pumps. The valve assembly are sold individually. These valves fit the Iota 17, 18, and 20
The Udor Kappa 18 12 volt diaphragm pumps is a two diaphragm pump with pulsation dampener. This diaphragm pump comes equipped with a heavy duty 12-...
View full details
The Kappa 25 GR is a two diaphragm pump with gear reduction, pulsation dampener and control unit. The control unit features an adjustable pressure ...
View full details
Part# 6017.06 is the replacement head for the kappa 30, kappa 40, kappa 75, and kappa 100. To ensure this pump head fits your Udor diaphragm pump p...
View full details
Part # 0501.85 is manifold cover on the Kappa 35 and Kappa 55.
The Udor Kappa 43 is a three diaphragm pump complete with control unit. The control unit features an adjustable pressure regulator, manual dump lev...
View full details
The Kappa 43 GR LP is a three diaphragm pump complete with control unit and gear box. The control unit features an adjustable pressure regulator , ...
View full details
The Kappa 43 HP with gear reduction is a three diaphragm pump rated for 560 PSI. The Kappa 43-GR HP comes with adjustable control unit, manual dump...
View full details
The Udor Kappa 43 WOC is the kappa 43 diaphragm pump with no gear reduction or control unit. This pump is commonly purchased to replace a broken pu...
View full details
The Udor Kappa 55 is a 15 GPM, three diaphragm pump with and adjustable control unit. The control unit offers two 1/2" ball valve outlet ports. Thi...
View full details
The Kappa 55 GR-5 is a 15 GPM three diaphragm pump with gear reduction, and adjustable control unit. The gear reduction comes attached to the pump ...
View full details
The Udor Kappa 55 WOC is the kappa 55 diaphragm pump with no gear reduction or control unit. This pump is commonly purchased to replace a broken pu...
View full details
Part number 8700.24 is the replacement diaphragm kit for the Udor Kappa-100 diaphragm pump. Udor recommends replacing the diaphragms after 500 hour...
View full details
Part # 8700.65CK is the complete rebuild kit for Udor Kappa-25 diaphragm pump. This kit includes everything needed for a complete pump rebuild. In...
View full details
Part # 6062.46 is the complete valve kit for the Udor Kappa43 and Kappa-55 diaphragm pumps. The kit includes 6 valves (6063.04) and 6 o-rings (1101...
View full details
Replacement Tips for Udor Long Range Spray Gun 13.901.151. NOTE: The Udor Long Range Spray Gun comes stock with 3.5mm spray tip 13.1802.73
The Udor Long Range Spray Gun is a high performance spray gun with a 21" barrel featuring 12mm internal tubing with stream straightener and adjusta...
View full details
Part #6061.29 is the replacement brass kit for Udor 18MM M-Series piston pumps.
Part # 6061.28 is the replacement seal kit for Udor 18MM M-Series plunger pumps. This kit includes both inlet seals.
Part # 6061.30 is the replacement valve kit for Udor MK-Series plunger pumps. This kit includes replacement valves and o-rings.
Part# 6033.01 has been replaced with part # 6033.13. Part# 6033.13 is the replacement oil bowl for most Udor diaphragm pumps. The oil bowl kit com...
View full details
Part# 6033.02 has been replaced with part # 6033.12. Part# 6033.12 is the replacement oil bowl for larger Udor diaphragm pumps. The oil bowl kit c...
View full details
Part# 1603.69 is the oil sight gauge plug on the gear reduction unit. This plug is found on many of the Kappa and Zeta series diaphragm pumps. The ...
View full details
Part # 29.1903.7 is the Udor reinforced polypropylene trigger valve with 1/2" female inlet & outlet ports. This trigger valve provides an excel...
View full details
SAE 40W hydraulic lubricant specially formulated for use in diaphragm & plunger pumps. Non-detergent Non-foaming Resists Breakdown Due to Oxid...
View full details
The 6010.24 regulator can be pump or remote mounted on numerous sprayers. This control unit features two 1/2" ball valve discharge ports and pressu...
View full details
& The 6010.93 control unit features right angle entry from the main body for smoother operation and longer life. The regulator includes a manua...
View full details
The Udor 6010.95 regulator is the same as the 6010.93 except it is fitted with a lighter spring and gauge for lower pressure applications. This reg...
View full details
The 6062.A9 rebuild kit replaces the main internals on the Udor 6010.93 and 6010.95 regulators. These regulators are are typically found on the Kap...
View full detailsSign-up for Gregson-Clark email updates.
Gregson-Clark Spraying Equipment
3213 Lehigh Street
Caledonia, NY 14423
Monday – Friday, 8 AM – 5 PM EST
Toll-Free: 1-800-706-9530
Local: (585) 538-9570
Fax: (585) 538-9577
Parts/Accessories
Matt@gregsonclark.com
Sales
Zack@gregsonclark.com
Copyright © 2025 Gregson-Clark Spraying Equipment.
Rhett M Clark Inc. All Rights Reserved. Powered by Shopify