Kappa-25 Diaphragm Kit - 6062.C1
Part # 6062.C1 has superseded 8700.65 for the Udor Kappa-25 diaphragm pump. Udor recommends replacing the diaphragms after 500 hours. The kit inclu...
View full detailsWith so many different pumps available, the options can be confusing. Our goal is not just to sell you a pump, we want to help you choose the right pump for your application. We welcome your phone call to discuss your application needs. Listed below are several pump brands we stock. For a full selection from each manufacture please use the filters to the left.
If you're not sure which brand would best suit your needs, a quick overview of each brand is below.
Each brand offers an extensive selection that is readily available. Due to the vast selection of pumps and replacement parts, our entire selection is yet to be all online. If there is a specific pump or part you are looking that is not listed online please call us, we'd be more than happy to help.
Part # 6062.C1 has superseded 8700.65 for the Udor Kappa-25 diaphragm pump. Udor recommends replacing the diaphragms after 500 hours. The kit inclu...
View full detailsPart# 12000A is the repair kit for the banjo 2" centrifugal pump with a 5 vane impeller. Please check your parts breakdown to ensure a proper fit. ...
View full detailsDemanding industrial pump environments require precise engineering and quality components—the ProFlo FatBoy® was designed with both. To maximize th...
View full detailsPart# RK-GE-860/1660 is the rebuild kit for the Ace GE-860 and Ace GE-1660 Centrifugal Pumps.
Diaphragm kit 9910-Kit2423 comes with all the parts needed to rebuild the Hypro D303 and D403 pumps. Hypro recommends changing the diaphragms every...
View full detailsThe 41 series 2 1/2" OEM pressure gauges are designed for use with any medium not corrosive to brass or bronze. Liquid-filled gauges are recommende...
View full detailsFLOJET Industrial Quad Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling ...
View full detailsUdor part # 8701.02 has been superseded by 6062.53, this rebuild kit replaces the main internals on the Udor 6047.06 & 6047.06/LP control units...
View full detailsThe Udor 6010.95 regulator is the same as the 6010.93 except it is fitted with a lighter spring and gauge for lower pressure applications. This reg...
View full detailsThe Hypro D252GRGI is a medium pressure, two diaphragm pump commonly used for lawn care and turf spraying applications. This pump assembly comes co...
View full detailsPart # 8700.01 is the replacement diaphragm kit for the Udor Iota-17 diaphragm pump. Udor recommends diaphragm replacement after 500 hours of use o...
View full detailsFLOJET Industrial Quad Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling ...
View full details9910-Kit2389 is the replacement o-ring kit for the Hypro D303 and D403 diaphragm pumps. This kit is typically used when rebuilding the pump at the ...
View full detailsUdor part 6062.29 replaces 8700.22 and is the replacement diaphragm kit for the Kappa-120 and Kappa-150 diaphragm pumps. Udor recommends replacing...
View full detailsThe 4000 series roller pumps from Hypro provide up to 10.4 GPM. The pump material will determine how long a pump will run before failure. The cast ...
View full detailsThe Udor 6047.06 is a pump or remote mount control unit with dual 1/2" ball valve discharge ports and pressure gauge. This regulator is rated for 5...
View full detailsPart # GG-1000BM is a direct replacement 1000 PSI pressure gauge for Udor regulators. It features 1/4" MPT on the back of the gauge.
Part 6062.E4 replaced 8700.75 and is the replacement diaphragm kit for the Udor Delta-75 diaphragm pump. Udor recommends replacing the pump diaphr...
View full detailsThe Kappa 43 HP with gear reduction is a three diaphragm pump rated for 560 PSI. The Kappa 43-GR HP comes with adjustable control unit, manual dump...
View full detailsSign-up for Gregson-Clark email updates.
Gregson-Clark Spraying Equipment
3213 Lehigh Street
Caledonia, NY 14423
Monday – Friday, 8 AM – 5 PM EST
Toll-Free: 1-800-706-9530
Local: (585) 538-9570
Fax: (585) 538-9577
Parts/Accessories
Andy@gregsonclark.com
Sales
Zack@gregsonclark.com
Copyright © 2024 Gregson-Clark Spraying Equipment.
Rhett M Clark Inc. All Rights Reserved. Powered by Shopify