Pumps & Control Units

Part # AR43241 is the replacement diaphragm kit for the AR70 diaphragm pump. AR recommends changing the diaphragms every 500 hours or three months,...

AR2388 is the valve replacement kit for the Hypro D303 and D403 diaphragm pumps. Pump valves may become worn over time which will affect the pump p...

AR1919 is the replacement O-ring kit for the AR50 diaphragm pump. This kit is typically used when rebuilding the pump at the end of the season. Inc...

Part # AR43249 is the replacement diaphragm kit for the AR115 and AR135 diaphragm pumps. AR recommends changing the diaphragms every 500 hours or t...

Part # 18025 is the mechanical seal assembly in Viton for 3" Banjo pumps. Check manual for proper fit. 

Part # 17035 is the mechanical seal assembly for 2" Banjo cast pumps. Check manual for proper fit. 

Part # 15035 is the Wet Seal Mechanical Seal Assembly FKM for select Banjo pumps. Check manual for proper fit. 

Part # 12713 is a Banjo replacement seal assembly in Viton.

Part # 12713 is a Banjo replacement seal assembly in Buna.

The Udor 5033.A4 gear reduction is used to connect specific Udor pumps to 8-13 HP engines with a 1" keyed shaft. The 5033.A4 gearbox requires 16oz ...

The Udor ZETA-40P is a compact, low-pressure positive-displacement diaphragm pump built for applications where chemical resistance and reliable flo...

The Udor ZETA-40P/GR combines the compact ZETA-40P three-diaphragm pump with a direct-mount gasoline-engine gear reduction, creating a durable and ...

Part #6061.10 is the replacement seal kit for Udor 22MM G-Series plunger pumps.

The Udor ZETA-85GR5 combines the proven ZETA 85 three-diaphragm pump with a compact factory gear reduction for gasoline-engine-driven commercial sp...

The Udor ZETA-120/GR is a high-flow, gas-engine-driven, 3 cylinder diaphragm pump designed for agricultural, horticultural, commercial spraying, fi...

The Kappa 55 GR-8 is a three diaphragm pump complete with gear reduction and control unit. The control unit features a manual dump lever and dual b...

The Udor Kappa 18 12 volt diaphragm pumps is a two diaphragm pump with pulsation dampener. This diaphragm pump comes equipped with a heavy duty 12-...

The Kappa 43 HP and Honda 5.5 HP pump and engine package is perfect for updating existing spray units. The pump package is great for busy professio...

6063.Q5 is the valve assembly for the Udor Zeta pumps. The valve assembly are sold individually.

Udor Bolt. Part # 1805.31

Udor part # 1805.25, Head Bolt (allen head - old style)

Udor part # 1805.04, Bolt

Udor Washer. Part # 1403.09

Udor part # 1101.16, O-Ring

Udor part # 0608.16, Air Valve Assembly

Udor Part # 0302.50, Pump Spacer

Udor Part # 0214.01, Pump Bearing

The Udor 0006.02 Bearing is an original equipment replacement bearing designed for select Udor diaphragm pumps. It supports the crankshaft inside t...

Part# RK-FMC is a replacement seal kit for a wide variety of Ace Centrifugal Pumps. The kit included the BAC-7V seal and BAC-4A o-ring.

Part# RK-BAC-75-HYD is a rebuild kit for the hydraulic motor on some Ace Pumps. Check your owners manual for the proper kit.

The 2" Banjo Transfer Pump is paired with a Honda 5.5 HP GX160 engine. The Banjo 2" self-priming pump features a light weight body, corrosion resis...

Part # 94-232-05 is the valve assembly for several of the Shurflo 2088 series pumps. This valve assembly is the replacement for the pump on the Spr...

Part # 8700.55 has been superseded by 6062.C7 is the replacement diaphragm kit for the Udor Beta-200 and Beta-240 diaphragm pumps. Udor recommends ...

A centrifugal pump that is leaking could mean it is time for a new pump seal. The Hypro 9305 centrifugal pump use seal kit # 3430-0500 for rebuildi...

Over time roller pumps will begin to wear and not perform as they once did. Hypro part # 3430-0381 is the rebuild kit for Hypro 7560 roller pumps. ...