Spray Tips/Boom Components

The XR flat fan spray tips from TeeJet offer uniform coverage at an affordable price. The "VS" tip features VisiFlo color coding with a stainless s...

Part # 22252-312-500-NYB is a double barbed nozzle body equipped with built in diaphragm check valve. This is part of the TeeJet QJ300 series. This...

The Boom X Tender is a boomless spray nozzle that is ideal for applications where a conventional boom cannot be used due to obstacles such as, powe...

The Turbo TeeJet Induction provides excellent drift protection while providing a uniform flat spray coverage. The Turbo TeeJet Induction Tip Featur...

The TeeJet TeeValve is used for selective control of three section boom sprayers at pressures up to 300 psi (20 bar). The AA17L features:  Use to ...

The TeeJet Triggerjet Trigger Valve is ideal for backpack and other small low pressure sprayers.The body is made from polypropylene and features a ...

The XR flat fan spray tips from TeeJet offer uniform coverage at an affordable price. The "SS" tips are solid stainless steel.  XR Spray Tips Featu...

The Boom X Tender is a boomless spray nozzle that is ideal for applications where a conventional boom cannot be used due to obstacles such as, powe...

The Turbo TeeJet spray tips are a wide angle, flat spray tip. Typical applications are pre-emerge surface applied herbicides with minimum spray pre...

The QJ111SQ-1-1/2 clamp is used to hold TeeJet quick series nozzle bodies to dry booms. The QJ111SQ-1-1/2 is used on 1-1/2" square tubing.

Flow indicators allow sprayer operators to visually monitor the flow of the system to spray tips and orifices. The floating balls in the indicator ...

Part# 20460-15 is the replacement Viton O-ring for Wilger flow indicators. EPDM O-rings are also available.

Part# 20460-03 is the replacement EPDM O-ring for Wilger flow indicators. Viton O-rings are also available.

Part # XT010-GIOKIT is the rebuild kit for the Hypro XT010 boomless spray nozzle.

Boominator boomless spray nozzles are made in the U.SA. and carry a 3 warranty against defects in materials and workmanship. All nozzles feature a ...

The QJ111SQ-1 clamp is used to hold TeeJet quick series nozzle bodies to dry booms. The QJ111SQ-1 is used on 1" square tubing.

Part # CP8027-NYB is the threaded cap that is used with TeeJet threaded nozzle bodies and adapters. The CP8027-NYB is made from nylon.

The CP114442 caps are used with a variety of TeeJet tips and nozzle bodies. The Quick TeeJet caps are made from nylon and feature a quarter turn lo...

The AIXR TeeJet Flat Spray Tip offers the benefits of obtaining excellent drift resistance without compromising spray coverage. Tips producing very...

The AA144P-1 two-way solenoid-operated DirectoValve® control valve is used on many spraying operations. The AA144P-1 offers a 3/4" inlet, 1/2" outl...

The TJ Golf  foam marker is built for small and medium size turf sprayers. Small foam balls are generated at the end of the boom to use as left/rig...

Banjo part # EVX200ADP is an adapter for older Banjo valves to accept the new EVX motors.  

Banjo part # EP21A10310 is the replacement actuator motor for most Banjo 3/4", 1", and 1 1/2" electric valves.  If you have the older style banjo v...

Boominator boomless spray nozzles are made in the U.SA. and carry a 3 warranty against defects in materials and workmanship. All nozzles feature a ...