With so many different pumps available, the options can be confusing. Our goal is not just to sell you a pump, we want to help you choose the right pump for your application. We welcome your phone call to discuss your application needs. Listed below are several pump brands we stock. For a full selection from each manufacture please use the filters to the left.
If you're not sure which brand would best suit your needs, a quick overview of each brand is below.
Each brand offers an extensive selection that is readily available. Due to the vast selection of pumps and replacement parts, our entire selection is yet to be all online. If there is a specific pump or part you are looking that is not listed online please call us, we'd be more than happy to help.
A centrifugal pump that is leaking could mean it is time for a new pump seal. The Hypro 1550 and 1551 centrifugal pumps use seal kit # 3430-0464 fo...
View full details
Part # AR43285 is the BlueFlex diaphragm kit for the AR30 and AR40 diaphragm pumps. This diaphragm kit will also work in the Hypro D30 Pump. When d...
View full details
Annovi Reverberi GIC40 diaphragm pump control unit with working pressure regulator valve and glycerin filled pressure gauge with colored dial. GI...
View full details
Part # GG-1000BM is a direct replacement 1000 PSI pressure gauge for Udor regulators. It features 1/4" MPT on the back of the gauge.
Part # 8700.01 is the replacement diaphragm kit for the Udor Iota-17 diaphragm pump. Udor recommends diaphragm replacement after 500 hours of use o...
View full details
The Udor 1 1/4" Inlet Barb Assembly includes all three components for the inlet side of the pump. 1 1/4" is used on most Gregson-Clark Sprayers. In...
View full details
Part # 6062.H5 is the replacement diaphragm kit for the Udor Delta 140 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...
View full details
Part # AR43281 is the BlueFlex diaphragm kit for the AR252 and Hypro D252 diaphragm pumps. When diaphragms rupture the oil in the reservoir will tu...
View full details
Udor part 6062.29 replaces 8700.22 and is the replacement diaphragm kit for the Kappa-120 and Kappa-150 diaphragm pumps. Udor recommends replacing...
View full details
Part 6062.E4 replaced 8700.75 and is the replacement diaphragm kit for the Udor Delta-75 diaphragm pump. Udor recommends replacing the pump diaphr...
View full details
Part # AR43293 is the BlueFlex diaphragm kit for the AR50 diaphragm pumps. This diaphragm kit will also work in the Hypro D50 Pump. When diaphragms...
View full details
SHURFLO 2088 Series diaphragm pumps deliver reliable performance in high flow, moderate pressure applications. They are used in a variety of sprayi...
View full details
The Udor 6047.06 is a pump or remote mount control unit with dual 1/2" ball valve discharge ports and pressure gauge. This regulator is rated for 5...
View full details
This control unit, for mounting on AR & older Hypro pump models AR303 and AR403, is capable of handling flow rates up to 10.6 gpm and pressures...
View full details
Part# RK-GE-800/1600 is the replacement seal kit for Ace GE-800 and Ace GE-1600 pumps. The Kit Includes: 1 - Type 21-1.25 - Mechanical Seal, Viton1...
View full details
Part # 6062.46 is the complete valve kit for the Udor Kappa43 and Kappa-55 diaphragm pumps. The kit includes 6 valves (6063.04) and 6 o-rings (1101...
View full details
Part # AR43289 is the BlueFlex diaphragm kit for the AR303 and AR403 diaphragm pumps. This diaphragm kit will also work in the Hypro D403 Pump. Whe...
View full details
Replacing pump valves are a maintenance task that should be tackled every couple of years. To replace the AR252 pump valves you will need AR part #...
View full details
Part # 3430-0383 is the rebuild kit for Hypro 1502 series roller pumps. You will need to rebuild roller pumps when they start to loose performance....
View full details
Part # 20403830 is the replacment diaphragm kit for the FloJet VersiJet Series pumps. This diaphragm kit fit the R8400, R8500, and R8600 12 volt di...
View full details
FLOJET Q40FF-118S-2P supersedes FLOJET part number 04300-043A and is a direct replacement FLOJET Industrial Quad Pumps are designed for a wide rang...
View full details
The Udor Kappa 55 is a 15 GPM, three diaphragm pump with and adjustable control unit. The control unit offers two 1/2" ball valve outlet ports. Thi...
View full details
The Kappa 43 HP with gear reduction is a three diaphragm pump rated for 560 PSI. The Kappa 43-GR HP comes with adjustable control unit, manual dump...
View full details
The Annovi Reverberi 1990 control unit is used on the AR252 diaphragm pumps. The control unit comes with one adjustable relief valve on pressure/ b...
View full details
Udor part # 8701.01 rebuild kit replaces the main internals on the Udor 6010.23 control units. These control units are found on the Iota-20 diaphra...
View full details
When a roller pump begins to loose performance and will not build pressure, a rebuild kit may be needed. For the Hypro 6500 series pumps part # 343...
View full details
The Udor Kappa 43 is a three diaphragm pump complete with control unit. The control unit features an adjustable pressure regulator, manual dump lev...
View full details
Part # 6062.97 superseded 8700.60, it is the replacement diaphragm kit for the Udor Zeta-40/85 diaphragm pumps. This rebuild kit also works for the...
View full details
Part # 8700.75CK is the complete rebuild kit for the Delta-75 diaphragm pump. This kit contains everything needed for a complete pump rebuild. Inc...
View full details
The Kappa 25 GR is a two diaphragm pump with gear reduction, pulsation dampener and control unit. The control unit features an adjustable pressure ...
View full details
Part # 12705 is the replacement check valve off the 2" Banjo poly centrifugal pumps.
