Pumps & Control Units

This control unit, for mounting on AR & older Hypro pump models AR303 and AR403, is capable of handling flow rates up to 10.6 gpm and pressures...

Pacer Part # 58-0704-30 is the replacement 3 vane impeller for Pacer S Series pumps with a 3/4" shaft.  

Part # 6062.H5 is the replacement diaphragm kit for the Udor Delta 140 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...

Part # AR43261 is the replacement diaphragm kit for the AR250, AR215 and AR280 diaphragm pumps. AR recommends changing the diaphragms every 500 hou...

Part # 12999AV is the replacement seal in Viton kit for Banjo pumps. Check your manual to ensure proper fit.

The ace GE-660 Centrifugal pump features a 1-1/2" inlet with a 1-1/4" outlet and is capable of 115 PSI max and 110 GPM max. The impeller connects t...

Part # UD-28B has been superseded by 6061.28, it is the replacement seal kit for Udor 18MM M-Series plunger pumps. This kit includes both inlet seals.

Part # UD-11 has been superseded by 6061.11, it is the replacement seal kit for Udor 25MM G-Series plunger pumps.

The Udor Kappa 55 WOC is the kappa 55 diaphragm pump with no gear reduction or control unit. This pump is commonly purchased to replace a broken pu...

The Delta 75 and Honda GX 390 electric start 13.0 HP engine is perfect for updating existing spray units. Installing the new pump and engine is a b...

Part# 6017.06 is the replacement head for the kappa 30, kappa 40, kappa 75, and kappa 100. To ensure this pump head fits your Udor diaphragm pump p...

Udor Diaphragm Bolt. Reference # 240. Part # 0102.04

Part# RK-GE-650 is the rebuild kit for the Ace GE-650 Centrifugal Pumps.

If your pump is not building pressure as it once was you may need to rebuild the regulator. The Hypro GR40 regulator uses part# 9910-Kit2488 as the...

Hypro 9910-Kit2388 is the valve replacement kit for the Hypro D303 and D403 diaphragm pumps. Pump valves may become worn over time which will affec...

Hypro 9910-Kit1987 is the replacement valve kit for the Hypro D503 diaphragm pump. Pump valves may become worn over time which will affect the pump...

Hypro rebuild kit 9910-Kit1730 is the replacement diaphragm kit for the D160 diaphragm pump. Hypro recommends changing the diaphragms every 500 hou...

Hypro rebuild kit 9910-Kit1721 is the replacement diaphragm kit for the D115 and D135 diaphragm pumps. Hypro recommends changing the diaphragms eve...

Udor part # 8701.01 rebuild kit replaces the main internals on the Udor 6010.23 control units. These control units are found on the Iota-20 diaphra...

Part # 8700.07 is the replacement diaphragm kit for the Udor Beta-150 and Omega-170 diaphragm pumps. Udor recommends diaphragm replacement after 50...

If you need to rebuild your Hypro centrifugal pump part # 3430-0332 may fit your pump. This seal kit fits a variety of Hypro pumps including the 92...

FLOJET Industrial Quad Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling ...

Udor part 8700.22CK is a complete rebuild kit for the Kappa-120 and Kappa-150 diaphragm pumps. Udor recommends replacing the pump diaphragms after ...

6062.E6 is the replacement valve kit for the Delta-75 pumps. The kit includes 6 new valves (6063.04) and 6 valve o-rings (1101.31).

Part Part # 58-702EP-U is the entire internals to rebuild the S series pacer pumps with 5 vane impeller. This kit includes all internal components ...

Part # AR43239 is the BlueFlex diaphragm kit for the AR45 diaphragm pump. When diaphragms rupture the oil in the reservoir will turn a milky color....

Part # AR1757 is the GI30, GI40 and GIC40 regulator rebuild kit. AR1757 will also rebuild the Hypro GS40 regulator. 

The AR252-GC-GCI3/4 is a medium pressure, two diaphragm pump commonly used for lawn care and turf spraying applications. This pump assembly comes c...

AR1920 is the replacement valve kit for the AR50 diaphragm pump. Valves may become worn over time which will affect the pump performance. A common ...

Part # AR1917 is the replacement valve kit for the AR 30 & AR40 diaphragm pumps. Valves become worn over time which can affect the overall perf...

AR43283 is the replacement diaphragm kit for the AR30 & AR40 diaphragm pumps. AR recommends changing the diaphragms every 500 hours. The kit in...

Part # AR4327 is the diaphragm rebuild kit for the AR 252 diaphragm pump. AR recommends changing the diaphragms every 500 hours or three months, wh...

Part # UD-12 has been superseded by 6061.12 is the replacement seal kit for Udor 28MM G-Series plunger pumps.

The Iota 20/GR is an internally manifolded, two-diaphragm pump with anodized aluminum and stainless-steel construction.  The Iota 20/GR model comes...