Pumps & Control Units

A centrifugal pump that is leaking could mean it is time for a new pump seal. The Hypro 1550 and 1551 centrifugal pumps use seal kit # 3430-0464 fo...

Annovi Reverberi GIC40 diaphragm pump control unit with working pressure regulator valve and glycerin filled pressure gauge with colored dial.   GI...

Udor O-Ring. Part # 1101.29

Replacing pump valves are a maintenance task that should be tackled every couple of years. To replace the AR252 pump valves you will need AR part #...

Part # 3430-0383 is the rebuild kit for Hypro 1502 series roller pumps. You will need to rebuild roller pumps when they start to loose performance....

Part # AR43281 is the BlueFlex diaphragm kit for the AR252 and Hypro D252 diaphragm pumps. When diaphragms rupture the oil in the reservoir will tu...

The Udor Kappa 43 is a three diaphragm pump complete with control unit. The control unit features an adjustable pressure regulator, manual dump lev...

Part # 12705 is the replacement check valve off the 2" Banjo poly centrifugal pumps.

Udor O-Ring. Part # 1101.D1

The Annovi Reverberi 1990 control unit is used on the AR252 diaphragm pumps. The control unit comes with one adjustable relief valve on pressure/ b...

Part # 8700.27 is the replacement diaphragm kit for the Kappa-7/12/18 diaphragm pumps. Udor recommends replacing the diaphragms every 500 hours. Th...

When a roller pump begins to loose performance and will not build pressure, a rebuild kit may be needed. For the Hypro 6500 series pumps part # 343...

Part # 20403830 is the replacment diaphragm kit for the FloJet VersiJet Series pumps. This diaphragm kit fit the R8400, R8500, and R8600 12 volt di...

This Kappa 43 Complete Pump Rebuild - 8700.45CK ensures maximum performance of your Kappa 33, 43, or 53 pump. Containing all essential components, ...

Part # AR43293 is the BlueFlex diaphragm kit for the AR50 diaphragm pumps. This diaphragm kit will also work in the Hypro D50 Pump. When diaphragms...

The Kappa 25 GR is a two diaphragm pump with gear reduction, pulsation dampener and control unit. The control unit features an adjustable pressure ...

Part number 8700.24 is the replacement diaphragm kit for the Udor Kappa-100 diaphragm pump. Udor recommends replacing the diaphragms after 500 hour...

Part # 20407840 is the replacment valve kit for the FloJet VersiJet Series pumps. This valve kit fits the R8400, R8500, and R8600 12 volt diaphragm...

Part # 20407820 is the replacment valve kit for the FloJet VersiJet Series pumps. This valve kit fits the R8400, R8500, and R8600 12 volt diaphragm...

Part # 6062.46 is the complete valve kit for the Udor Kappa43 and Kappa-55 diaphragm pumps. The kit includes 6 valves (6063.04) and 6 o-rings (1101...

Part # 6062.G4 is the replacement diaphragm kit for the Udor Delta 40 & delta 50 diaphragm pumps. Udor recommends replacing the pump diaphragms...

Part # AR43289 is the BlueFlex diaphragm kit for the AR303 and AR403 diaphragm pumps. This diaphragm kit will also work in the Hypro D403 Pump. Whe...

Udor part # 1101.87, O-Ring

Udor part # 1101.62, O-Ring

Part # 6062.97 superseded 8700.60, it is the replacement diaphragm kit for the Udor Zeta-40/85 diaphragm pumps. This rebuild kit also works for the...

Udor part number 8700.09 has been superseded by 6062.H3 and is the replacement diaphragm kit for the Udor RO-160 diaphragm pump. Udor recommends re...

Udor part number 8700.05 is the replacement diaphragm kit for the Udor RO-70 diaphragm pump. Udor recommends replacing he diaphragms after 500 hour...

Hypro roller pumps will need to be rebuilt when they start t loose performance. Part # 3430-0380 is the rebuild kit for Hypro 6500 series roller pu...

The Banjo 2" self-priming centrifugal pump attaches to small gas powered engines to work as a pumping solution for high fluid applications. Poly ce...

FLOJET Industrial Quad Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling ...

Pacer Part # 58-0704-30 is the replacement 3 vane impeller for Pacer S Series pumps with a 3/4" shaft.  

Part # 6062.H5 is the replacement diaphragm kit for the Udor Delta 140 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...

Part # UD-3 has been superseded by 6061.03, it is the replacement valve kit for Udor G-Series plunger pumps. The kit comes with 6 new valves and o-...

The Hypro Aqua-Tiger is a 12V centrifugal pump that is rated up to 19 GPM, with a max PSI of 7. Both the inlet and outlet ports are 3/4" female pip...

Part# 6017.06 is the replacement head for the kappa 30, kappa 40, kappa 75, and kappa 100. To ensure this pump head fits your Udor diaphragm pump p...

Part # 6006.77 is the valve assembly for the Udor RO, Kappa 120, Kappa 150 and Beta pumps. The valve assembly are sold individually, please check t...

Part # 12772 is the replacement 5 vane impeller off most 2" banjo centrifugal pumps. Be sure to check the parts breakdown on your specific model to...

Part # 12713 is the replacement EPDM seal kit for banjo centrifugal pumps. To ensure a proper fit check parts breakdown on your specific pump.

Part # 0501.85 is manifold cover on the Kappa 35 and Kappa 55.

Diaphragm Washer. Part # 0301.43

Udor 1" Suction Elbow. Reference# 357, Part# 0202.18

Diaphragm AR43303 includes all parts needed to replace diaphragms on the AR1064 pump. AR recommends changing diaphragms every 500 hours or three mo...

Part # 8700.75CK is the complete rebuild kit for the Delta-75 diaphragm pump. This kit contains everything needed for a complete pump rebuild.  Inc...

Pacer Part # 58-0705-72 is the replacement check valve for Pacer S Series pumps.  

FLOJET Industrial Quad Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling ...

Part # UD-30 has been superseded by 6061.30, it is the replacement valve kit for Udor MK-Series plunger pumps. This kit includes replacement valves...

The Iota 20 is an internally manifolded, two-diaphragm pump with anodized aluminum and stainless-steel construction.  The Iota 20 comes with adjust...

The Udor Kappa 55 is a 15 GPM, three diaphragm pump with and adjustable control unit. The control unit offers two 1/2" ball valve outlet ports. Thi...