Pumps & Control Units

Part # AR43257 is the replacement diaphragm kit for the AR160 and AR185 diaphragm pumps. AR recommends changing the diaphragms every 500 hours or t...

The AR30-GR3/4-GCI is a medium pressure, two diaphragm pump assembly that is popular in the lawn care industry.  GR3/4-GCI version Gear Reduction A...

AR2409 is the O-Ring kit for the AR252 diaphragm pump.  AR2409 replaces 9910-Kit2409 and is compatible with Hypro D252 pumps. 

Part # 12999AV is the replacement seal in Viton kit for Banjo pumps. Check your manual to ensure proper fit. Kit Includes: 1x 12099 7/16-14 X 1 1/4...

Part # RK-GE-660 is the repair kit for the Ace GE-660 centrifugal pump. The kit includes replacement seal, o-ring, washers and thread-locker.

Part #6061.29 is the replacement brass kit for Udor 18MM M-Series piston pumps.

Part #6061.11 is the replacement seal kit for Udor 25MM G-Series plunger pumps.

The Iota 20/GR is an internally manifolded, two-diaphragm pump with anodized aluminum and stainless-steel construction.  The Iota 20/GR model comes...

The Delta 100/GR is a 4-cylinder, medium pressure diaphragm pump with pulsation dampener and control unit. The control unit features an adjustable ...

The Kappa 55 GR-5 is a 15 GPM three diaphragm pump with gear reduction, and adjustable control unit. The gear reduction comes attached to the pump ...

Udor part # 1603.44, Plug

Udor Drain Plug. Part # 1603.32

Udor O-Ring. Part # 1101.27

Udor Diaphragm. Part # 0903.15

Udor Seal Retainer Part # 0501.02

The Udor 0102.04 Diaphragm Bolt is an original equipment replacement component used in the diaphragm assembly of compatible Udor agricultural, hort...

Part # 8700.07 is the replacement diaphragm kit for the Udor Beta-150 and Omega-170 diaphragm pumps. Udor recommends diaphragm replacement after 50...

If your Hypro centrifugal pump is leaking chances are you need a new seal kit. Part # 3430-0334 seal kit fits the 9000c pump. To ensure this kit fi...

The Udor 0007.33 Gear Reduction Oil Seal is an original equipment replacement component designed for compatible Udor diaphragm- and plunger-pump ge...

Udor part # 1101.57, O-Ring.  Replaced by #1101.93

Part Part # 58-977EP-RS is the entire internals to rebuild the S series pacer pumps with 4 vane impeller. This kit includes all internal components...

* This unit ships in 2-3 days The AR45LFP-GR-GCI is a low pressure, three diaphragm pump with poly external manifolds. This pump is a good choice f...

* This unit ships in 3-5 days The AR403-GR3/4-GCI is a medium pressure diaphragm pump that is popular in the lawn care and pest control industry. T...

Part # AR43247 is the BlueFlex diaphragm kit for the AR80LFP diaphragm pump. When diaphragms rupture the oil in the reservoir will turn a milky col...

Part # 6062.H7 is the replacement diaphragm kit for the Udor Delta 170 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...

AR2389 is the replacement O-ring kit for the AR303 and AR403 diaphragm pumps. This kit is typically used when rebuilding the pump at the end of the...

Part # 12999A is the replacement seal kit for Banjo pumps. Check your manual to ensure proper fit. Kit Includes: 1x 12099 7/16-14 X 1 1/4" HHCS1x R...

The Udor 5071.75 gear reduction is used to connect Kappa-33, Kappa-43 and Kappa-53 pumps to 4-6.5 HP engines with a 3/4" keyed shaft.     Udor 507...

Part #6061.12 is the replacement seal kit for Udor 28MM G-Series plunger pumps.

The Udor ZETA-85P/GR5 combines the chemical resistance of Udor's ZETA-85P poly diaphragm pump with a factory-installed gear reduction, making it an...

The Udor DELTA-40/GR combines the dependable performance of a positive-displacement diaphragm pump with a compact gas-engine gear-reduction drive.I...

The Kappa 43 LP and Honda 5.5 HP pump and engine package is perfect for updating existing spray units. The pump package is great for busy professio...

The Udor DELTA 75 VA is designed for professional spray systems that require significantly more operating pressure than a conventional low-pressure...

Part # 6006.21 is the valve assembly for the Udor Iota pumps. The valve assembly are sold individually. These valves fit the Iota 17, 18, and 20

Udor part # 1805.21, Bolt

Udor Bolt. Part # 1805.20

Udor Kappa 43 Piston Part # 1205.07

Udor part # 1101.68, O-Ring

Part# RK-FMC-150 is a replacement seal kit for Ace FMC-150 pumps. The kit included the BAC-7V seal, Bac-24-HYD-SS washer, 40160 O-ring and BAC-4A-1...

Part # 94-543-138 is the vakve assembly for several of the Shurflo 8000 series pumps. This assembly is the replacement for the pump on the Eco-505 ...

Part # 94-238-03 is the diaphragm assembly for several of the Shurflo 2088 series pumps. This assembly is the replacement for the pump on the Sprea...

The remount mount regulator kit from Udor, Part # 7704.05 is used with standard pumps for remote mounting the following control units 6010.24, 6047...

Hypro part # 3430-0748 is the rebuild kit for hydraulic motors that run Hypro centrifugal pumps. To ensure this rebuild kit is for your hydraulic m...

If your Hypro centrifugal pump is leaking chances are you need a new seal. Part # 3430-0333 is seal kit fits a variety of Hypro pumps including the...

Product Description The REMCO RollMax R880C eight-roller pump provides the higher flow capacity required by large agricultural sprayers, wide spray...

Product Description The REMCO RollMax R660C six-roller pump provides the flow, pressure and serviceability needed for demanding agricultural sprayi...

  Please note that this item is not part of our regular inventory and will ship directly from the manufacturer. Direct factory processing and dispa...

The Udor ZETA-85P is a low-pressure positive-displacement diaphragm pump built for demanding commercial spraying and aggressive-fluid applications....