Udor MK Valve Kit 6061.30
Part # 6061.30 is the replacement valve kit for Udor MK-Series plunger pumps. This kit includes replacement valves and o-rings.
Part # 6061.30 is the replacement valve kit for Udor MK-Series plunger pumps. This kit includes replacement valves and o-rings.
Part# 6033.01 has been replaced with part # 6033.13. Part# 6033.13 is the replacement oil bowl for most Udor diaphragm pumps. The oil bowl kit com...
View full details
Part# 6033.02 has been replaced with part # 6033.12. Part# 6033.12 is the replacement oil bowl for larger Udor diaphragm pumps. The oil bowl kit c...
View full details
Part# 1603.69 is the oil sight gauge plug on the gear reduction unit. This plug is found on many of the Kappa and Zeta series diaphragm pumps. The ...
View full details
Part # 29.1903.7 is the Udor reinforced polypropylene trigger valve with 1/2" female inlet & outlet ports. This trigger valve provides an excel...
View full details
SAE 40W hydraulic lubricant specially formulated for use in diaphragm & plunger pumps. Non-detergent Non-foaming Resists Breakdown Due to Oxid...
View full details
The 6010.24 regulator can be pump or remote mounted on numerous sprayers. This control unit features two 1/2" ball valve discharge ports and pressu...
View full details
& The 6010.93 control unit features right angle entry from the main body for smoother operation and longer life. The regulator includes a manua...
View full details
The Udor 6010.95 regulator is the same as the 6010.93 except it is fitted with a lighter spring and gauge for lower pressure applications. This reg...
View full details
The 6062.A9 rebuild kit replaces the main internals on the Udor 6010.93 and 6010.95 regulators. These regulators are are typically found on the Kap...
View full details
Udor part # 8701.02 has been superseded by 6062.53, this rebuild kit replaces the main internals on the Udor 6047.06 & 6047.06/LP control units...
View full details
The 8701.10 has been superseded by 6062.55, this rebuild kit replaces the main internals on the Udor 6010.24 and 6010.24/LP control units. These co...
View full details
The remount mount regulator kit from Udor, Part # 7704.05 is used with standard pumps for remote mounting the following control units 6010.24, 6047...
View full details
Part # 1204.24 is the replacement urethane poppet used in several Udor pressure regulators.
Part number 8700.04 has been superseded by 6062.H2 is the replacement diaphragm kit for the Udor RO-110/130 pumps. Udor recommends replacing the di...
View full details
Udor part number 8700.09 has been superseded by 6062.H3 and is the replacement diaphragm kit for the Udor RO-160 diaphragm pump. Udor recommends re...
View full details
Udor part number 8700.05 is the replacement diaphragm kit for the Udor RO-70 diaphragm pump. Udor recommends replacing he diaphragms after 500 hour...
View full details
Part # 6006.77 is the valve assembly for the Udor RO, Kappa 120, Kappa 150 and Beta pumps. The valve assembly are sold individually, please check t...
View full details
Part # 34.1302.2 is a commercial grade root feeding probe from Udor. The root feeder features a nickel-plated trigger valve with 1/2" FPT swivel in...
View full details
Part #6061.10 is the replacement seal kit for Udor 22MM G-Series plunger pumps.
Organize and protect your equipment with these durable spray gun holders that are made of UV resistant co-polymer materials. Spray gun holders ca b...
View full details
Organize and protect your equipment with these durable spray gun holders that are made of UV resistant co-polymer materials. Spray gun holders ca b...
View full details
Part # 1101.41 is the o-ring for the suction barb on most Udor Kappa pumps.
The Udor Turbine Spray Gun is a high performance spraying gun with a 17" barrel featuring 10mm internal tubing with adjustable spray pattern, rangi...
View full details
The Udor Turbo Gun is a high performance spray gun with a 8" barrel. The gun allows for an adjustable spray patter ranging from solid stream to a c...
View full details
Part # is 6006.01 has been superseded by 6063.04, it is the valve assembly for most Udor Kappa series pumps. As these are sold individually, please...
View full details
The Zeta 120/GR is a low pressure, 3-cylinder diaphragm pump that features anodized aluminum bodies, stainless steel valves, plasticized aluminum...
View full details
The Zeta 40P/GR is a low pressure, 3-cylinder diaphragm poly pump that features anodized aluminum bodies, stainless steel valves, poly heads and gl...
View full details
The Udor Zeta 85/GR-5 pump is a three diaphragm pump with control unit featuring adjustable pressure regulator, manual dump lever, dual ball valve ...
View full details
The Zeta 85P/GR-5 is a low pressure, 3-cylinder diaphragm poly pump that features anodized aluminum bodies, stainless steel valves, poly heads and ...
View full details
6063.Q5 is the valve assembly for the Udor Zeta pumps. The valve assembly are sold individually.
Part # 6062.97 superseded 8700.60, it is the replacement diaphragm kit for the Udor Zeta-40/85 diaphragm pumps. This rebuild kit also works for the...
View full details
The Zeta 40P is a low pressure, 3-cylinder diaphragm poly pump that features anodized aluminum bodies, stainless steel valves, poly heads and glass...
View full details
Part # UV15163 is the replacement o-ring from the Banjo 1/2" drain plug (12777).
The V-100 ST skid sprayer fits well in medium and full sized pickup trucks. The smaller foot print also makes this sprayer perfect for vans and enc...
View full details
The V-100/100 TS-43 tree sprayer uses the tank/frame assembly from the V-100 and upgrades the pumping system to a high pressure Kappa-43. Adding a...
View full details
The V-100E electric skid sprayer fits well in medium and full sized pickup trucks. The smaller foot print also makes this unit perfect for van...
View full details
The V-150 ST skid sprayer offers the largest capacity available for full sized pickup trucks without obstructing the rear window. Gregson-Clark sp...
View full details
The V-200 ST skid sprayer is our most popular model. The 200-gallon capacity fits well in full sized pickup trucks while leaving plenty of room for...
View full details
Our most popular Skid Sprayer is now available with aluminum framework. The 200-gallon capacity fits well in full sized pickup trucks while leaving...
View full details
The V-200 TS-55 tree sprayer uses the tank/frame from the V-200 to provide a unit that fits well in full sized pickup trucks while leaving plenty o...
View full details
The V-300 TS-75 tree sprayer uses the tank/frame assembly from the V-300 and upgrades the pumping system, hose reel, hose and spray gun to deliver ...
View full detailsSign-up for Gregson-Clark email updates.
Gregson-Clark Spraying Equipment
3213 Lehigh Street
Caledonia, NY 14423
Monday – Friday, 8 AM – 5 PM EST
Toll-Free: 1-800-706-9530
Local: (585) 538-9570
Fax: (585) 538-9577
Parts/Accessories
Matt@gregsonclark.com
Sales
Zack@gregsonclark.com
Copyright © 2025 Gregson-Clark Spraying Equipment.
Rhett M Clark Inc. All Rights Reserved. Powered by Shopify