We are often asked how far can a sprayer reach. One of the key factors that can significantly impact the height of spray is the size of the pump and hose used. Here’s why investing in a larger pump and...
In this video we show how to install a new roll of Coax hose to the Gregson-Clark Eco-505 Injection system. Coax hose is available in 300' and 400' rolls. For this install you will need: Replacement hose (4) 3/16 compression...
One of the most frequent questions we answer is related to pump and engine oil capacity and type. On a Gregson-Clark skid sprayer and spraying equipment, there are typically three components that require oil. The first component is the engine. Gregson-Clark...
Hose roller guides are added to sprayers to assist in pay-out and rewinding of the hose. Hose roller guides help keep the hose off the side of the vehicle when pulling the hose off at sharp angles. Selecting the correct...
The following are step by step instructions on replacing the top valve on the Gregson-Clark Eco-505 Injection Gun. Please contact us if you have any questions on the procedure. Tools Needed: 8MM Socket or nut driver (actuator arm screws) 9MM Socket...
The following are step by step instructions for installing our coax hose on a reel and at the spray gun. Please contact us if you have any questions with the procedure. Installation of Coax at Hose Reel: Install 1/2" x...
Whether you’re looking to run separate products or just add capacity to your existing system, the 3-way valve kit along with a modular tank from Gregson-Clark allows operators a wide range of possibilities. With a modular tank and 3-way valves...
