AR 30 & AR 40 O-ring kit
AR1916 is the replacement O-ring kit for the AR30 and AR40 diaphragm pumps. This kit is typically used when rebuilding the pump at the end of the s...
View full detailsWith so many different pumps available, the options can be confusing. Our goal is not just to sell you a pump, we want to help you choose the right pump for your application. We welcome your phone call to discuss your application needs. Listed below are several pump brands we stock. For a full selection from each manufacture please use the filters to the left.
If you're not sure which brand would best suit your needs, a quick overview of each brand is below.
Each brand offers an extensive selection that is readily available. Due to the vast selection of pumps and replacement parts, our entire selection is yet to be all online. If there is a specific pump or part you are looking that is not listed online please call us, we'd be more than happy to help.
AR1916 is the replacement O-ring kit for the AR30 and AR40 diaphragm pumps. This kit is typically used when rebuilding the pump at the end of the s...
View full detailsAR2409 is the O-Ring kit for the AR252 diaphragm pump. AR2409 replaces 9910-Kit2409 and is compatible with Hypro D252 pumps.
Part # AR43249 is the replacement diaphragm kit for the AR115 and AR135 diaphragm pumps. AR recommends changing the diaphragms every 500 hours or t...
View full detailsPart # 18025 is the mechanical seal assembly in Viton for 3" Banjo pumps. Check manual for proper fit.
Part # 17035 is the mechanical seal assembly for 2" Banjo cast pumps. Check manual for proper fit.
Part # 15035 is the Wet Seal Mechanical Seal Assembly FKM for select Banjo pumps. Check manual for proper fit.
Part # 12999A is the replacement seal kit for Banjo pumps. Check your manual to ensure proper fit.
Part # 12713 is a Banjo replacement seal assembly in Viton.
Part # RK-GE-660 is the repair kit for the Ace GE-660 centrifugal pump. The kit includes replacement seal, o-ring, washers and thread-locker.
The Udor 5033.A4 gear reduction is used to connect specific Udor pumps to 8-13 HP engines with a 1" keyed shaft. The 5033.A4 gearbox requires 16oz ...
View full detailsThe Udor 5027.75 gear reduction is used to connect Udor pumps to 4-6.5 HP engines with a 3/4" keyed shaft. 5027.75 requires 16oz of 90W gear oil. ...
View full detailsThe Udor 5071.75 gear reduction is used to connect Kappa-33, Kappa-43 and Kappa-53 pumps to 4-6.5 HP engines with a 3/4" keyed shaft. ...
View full detailsThe Zeta 40P is a low pressure, 3-cylinder diaphragm poly pump that features anodized aluminum bodies, stainless steel valves, poly heads and glass...
View full detailsThe Zeta 40P/GR is a low pressure, 3-cylinder diaphragm poly pump that features anodized aluminum bodies, stainless steel valves, poly heads and gl...
View full detailsPart # UD-29 has been superseded by 6061.29, it is the replacement brass kit for Udor 18MM M-Series piston pumps.
Part # UD-10 has been superseded by 6061.10, it is the replacement seal kit for Udor 22MM G-Series plunger pumps.
The Udor Zeta 85/GR-5 pump is a three diaphragm pump with control unit featuring adjustable pressure regulator, manual dump lever, dual ball valve ...
View full detailsThe Zeta 85P/GR-5 is a low pressure, 3-cylinder diaphragm poly pump that features anodized aluminum bodies, stainless steel valves, poly heads and ...
View full detailsThe Zeta 120/GR is a low pressure, 3-cylinder diaphragm pump that features anodized aluminum bodies, stainless steel valves, plasticized aluminum...
View full detailsThe Kappa 55 GR-8 is a three diaphragm pump complete with gear reduction and control unit. The control unit features a manual dump lever and dual b...
View full detailsThe Udor Kappa 43 WOC is the kappa 43 diaphragm pump with no gear reduction or control unit. This pump is commonly purchased to replace a broken pu...
View full detailsThe Udor Kappa 18 12 volt diaphragm pumps is a two diaphragm pump with pulsation dampener. This diaphragm pump comes equipped with a heavy duty 12-...
View full detailsThe Kappa 43 HP and Honda 5.5 HP pump and engine package is perfect for updating existing spray units. The pump package is great for busy professio...
View full detailsDelta-75 medium pressure diaphragm pumps are excellent for various horticultural, agricultural, lawn care, nursery and turf spraying applications. ...
View full details6063.Q5 is the valve assembly for the Udor Zeta pumps. The valve assembly are sold individually.
Part# RK-FMC-150 is a replacement seal kit for Ace FMC-150 pumps. The kit included the BAC-7V seal, Bac-24-HYD-SS washer, 40160 O-ring and BAC-4A-1...
View full detailsPart# RK-FMC is a replacement seal kit for a wide variety of Ace Centrifugal Pumps. The kit included the BAC-7V seal and BAC-4A o-ring.
Part# RK-BAC-75-HYD is a rebuild kit for the hydraulic motor on some Ace Pumps. Check your owners manual for the proper kit.
The 2" Banjo Transfer Pump is paired with a Honda 5.5 HP GX160 engine. The Banjo 2" self-priming pump features a light weight body, corrosion resis...
View full detailsPart # 94-232-05 is the valve assembly for several of the Shurflo 2088 series pumps. This valve assembly is the replacement for the pump on the Spr...
View full detailsPart # 8700.55 has been superseded by 6062.C7 is the replacement diaphragm kit for the Udor Beta-200 and Beta-240 diaphragm pumps. Udor recommends ...
View full detailsThe Udor 6005.15 high volume brass pressure regulator features a master on.off lever, 3/4" male BSP inlet port, 1/4" gauge port, and a 1" bypass po...
View full detailsA centrifugal pump that is leaking could mean it is time for a new pump seal. The Hypro 9305 centrifugal pump use seal kit # 3430-0500 for rebuildi...
View full detailsOver time roller pumps will begin to wear and not perform as they once did. Hypro part # 3430-0381 is the rebuild kit for Hypro 7560 roller pumps. ...
View full detailsSign-up for Gregson-Clark email updates.
Gregson-Clark Spraying Equipment
3213 Lehigh Street
Caledonia, NY 14423
Monday – Friday, 8 AM – 5 PM EST
Toll-Free: 1-800-706-9530
Local: (585) 538-9570
Fax: (585) 538-9577
Parts/Accessories
Matt@gregsonclark.com
Sales
Zack@gregsonclark.com
Copyright © 2025 Gregson-Clark Spraying Equipment.
Rhett M Clark Inc. All Rights Reserved. Powered by Shopify