Pumps & Control Units

Part # 6062.H7 is the replacement diaphragm kit for the Udor Delta 170 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...

  Ace roller pumps have returned to the market to provide a reliable, dependable and American made products to consumers. The new Ace roller pump l...

  Ace roller pumps have returned to the market to provide a reliable, dependable and American made products to consumers. The new Ace roller pump l...

Part # AR2488 is the rebuild kit for the GR40 regulator.  AR2488 replaces 9910-KIT2488. 

AR1987 is the valve replacement kit for the AR1987 diaphragm pumps. Pump valves may become worn over time which will affect the pump performance. A...

Part # AR43295 is the diaphragm rebuild kit for the AR 503 diaphragm pump. AR recommends changing the diaphragms every 500 hours or three months, w...

Part # AR43241 is the replacement diaphragm kit for the AR70 diaphragm pump. AR recommends changing the diaphragms every 500 hours or three months,...

The AR30-SP is a medium pressure diaphragm pump that is popular in the lawn care and pest control industry. The AR30 assembly is the pump only with...

AR2388 is the valve replacement kit for the Hypro D303 and D403 diaphragm pumps. Pump valves may become worn over time which will affect the pump p...

SE2UL E950 Pacer 2" Poly Centrifugal Transfer Pump with Briggs 6.5hp Engine. Utility transfer pump used to transfer chemicals, water and salt wa...

AR1919 is the replacement O-ring kit for the AR50 diaphragm pump. This kit is typically used when rebuilding the pump at the end of the season. Inc...

AR Kit AR43291 is the replacement diaphragm kit for the AR50 diaphragm pump.  The kit includes two replacement Desmopan diaphragms, four replacemen...

AR1916 is the replacement O-ring kit for the AR30 and AR40 diaphragm pumps. This kit is typically used when rebuilding the pump at the end of the s...

AR2409 is the O-Ring kit for the AR252 diaphragm pump.  AR2409 replaces 9910-Kit2409 and is compatible with Hypro D252 pumps. 

Part # AR43249 is the replacement diaphragm kit for the AR115 and AR135 diaphragm pumps. AR recommends changing the diaphragms every 500 hours or t...

Part # 18025 is the mechanical seal assembly in Viton for 3" Banjo pumps. Check manual for proper fit. 

Part # 17035 is the mechanical seal assembly for 2" Banjo cast pumps. Check manual for proper fit. 

Part # 15035 is the Wet Seal Mechanical Seal Assembly FKM for select Banjo pumps. Check manual for proper fit. 

Part # 12999A is the replacement seal kit for Banjo pumps. Check your manual to ensure proper fit.

Part # 12713 is a Banjo replacement seal assembly in Viton.

Part # 12713 is a Banjo replacement seal assembly in Buna.

Part # RK-GE-660 is the repair kit for the Ace GE-660 centrifugal pump. The kit includes replacement seal, o-ring, washers and thread-locker.

The Udor 5033.A4 gear reduction is used to connect specific Udor pumps to 8-13 HP engines with a 1" keyed shaft. The 5033.A4 gearbox requires 16oz ...

The Udor 5027.75 gear reduction is used to connect Udor pumps to 4-6.5 HP engines with a 3/4" keyed shaft. 5027.75 requires 16oz of 90W gear oil.  ...

The Udor 5071.75 gear reduction is used to connect Kappa-33, Kappa-43 and Kappa-53 pumps to 4-6.5 HP engines with a 3/4" keyed shaft. ...

The Zeta 40P is a low pressure, 3-cylinder diaphragm poly pump that features anodized aluminum bodies, stainless steel valves, poly heads and glass...

The Zeta 40P/GR is a low pressure, 3-cylinder diaphragm poly pump that features anodized aluminum bodies, stainless steel valves, poly heads and gl...

Part # UD-29 has been superseded by 6061.29, it is the replacement brass kit for Udor 18MM M-Series piston pumps.

Part # UD-10 has been superseded by 6061.10, it is the replacement seal kit for Udor 22MM G-Series plunger pumps.

The Udor Zeta 85/GR-5 pump is a three diaphragm pump with control unit featuring adjustable pressure regulator, manual dump lever, dual ball valve ...

The Zeta 85P/GR-5 is a low pressure, 3-cylinder diaphragm poly pump that features anodized aluminum bodies, stainless steel valves, poly heads and ...

  The Zeta 120/GR is a low pressure, 3-cylinder diaphragm pump that features anodized aluminum bodies, stainless steel valves, plasticized aluminum...

The Kappa 55 GR-8 is a three diaphragm pump complete with gear reduction and control unit. The control unit features a manual dump lever and dual b...

The Udor Kappa 43 WOC is the kappa 43 diaphragm pump with no gear reduction or control unit. This pump is commonly purchased to replace a broken pu...

The Udor Kappa 18 12 volt diaphragm pumps is a two diaphragm pump with pulsation dampener. This diaphragm pump comes equipped with a heavy duty 12-...

The Kappa 43 HP and Honda 5.5 HP pump and engine package is perfect for updating existing spray units. The pump package is great for busy professio...